0
Do you have to replace head bolts during overhauling an engine?
Wiki User
∙ 13y ago
It is required with some engines.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How important is it to replace the head bolts on a 1999 2.2 s-10?
If I were overhauling this engine, I would replace the head bolts with new ones. Money well spent.
Do you need to replace the head bolts when you replace the heads on your 4.0 L V6?
If the engine is high mileage yes, replace the head bolts. If it is low mileage it is your choice, but is always a good idea to replace them.
During mat maintenance what should be done with the loose anchor bolts?
Retighten or replace the bolts
Saturn sl1 where's the upper motor mount located How do you replace it?
The upper engine mount is on the passenger side of the vehicle right in the middle of the engine. There are 5 bolts holding it on. The bolts are a size 15mm deep socket. Remove the two bolts on either side. Jack up the engine from the bottom, underneath the oil pan, using a piece of wood between the jack and pan. Now remove the 3 bolts holding the mount to the engine. Replace the mount. Screw 3 bolts back in. Lower the engine and screw the two side bolts back in.
How do you replace flywheel in your dodge stratus?
You must separate the transmission from the engine. Then remove the eight bolts that hold it in place. Remove and replace.
How replace flex plate in subaru legacy 96?
You have to pull the engine or transmission. The Flex plate is at the back of the engine on an automatic transmission. 6-8 bolts hold the plate to the engine, and four bolts hold the plate to the tranny.
Do you have to replace the head bolts on a 2002 dodge caravan 3.3L engine when changing headgaskets?
Not unless they have stretched.
Do you need to remove the engine to replace the oil pan on a 1992 Toyota Corolla or can I just remove the bolts on the oil pan?
If you have clearance just remove bolts
How do you replace flywheel on 1976 Camaro?
remove the transmission and take the bolts out of the flywheel on back of the engine and install the new one and tighten the bolts back up, you will have to find out what the bolts are torqued at as I'm not sure.
How do you Replace thermostat in a 2.4 engine?
It's located between the firewall and the engine below the exhaust shield. Need to use a socket and universal to get to the bolts.
Where is the egr valve in a 2005 pacifica can you replace it yourself?
On a 3.8L engine, the EGR valve is at the back of the engine on the right side, near the top of the engine. It is held on to the engine by two small bolts. Attached on the side of the EGR valve is a metal pipe held on to the EGR by two small bolts. If you remove the EGR, be careful not to drop any of the bolts down in the engine as you will never find them. Experience talking here. Fairly easy to replace but make sure you get the right one for your sized engine. I got mine at NAPA for about $70.
How do you replace 1991 astro van motor mount?
Use a jack with a board on top to support the engine. Loosen the bolts for the motor mount. Raise the engine slightly then take the bolts out and remove the motor mount. Install the new mount, tighten the bolts, then remove the jack.
