That depends greatly on the make, model, and year of the car. Please ask a new specific question about with the year, make , model, engine size.
After removing and reinstalling the transmission in a 2006 Sienna, the transmission must be reprogrammed to ensure it shifts properly. This is done by connecting an automotive computer to the vehicle and resetting the parameters.
The screen is accessable by removing the bottom pan of the transmission. most people clean it with carb cleaner or brake cleaner and dry it before reinstalling it.
By removing the gear box , then reinstalling it and finally removing the old belt and replace by a new one.
By removing the transmission from the truck, then removing the seal.
No. Installing / reinstalling / removing a program has no bearing on your files.
The immobilizer on a Peugeot 207 can be reset by removing it and reinstalling. Another option is to install a new reader.
you dont have the speedodmeter cable set in the transmission right take it back out and as u set it in place turn it till it seats flush on the transmission
It is actually inside the transmission itself. You get to it be removing the transmission pan.
Probably electrical, you may have accidentally unplugged a connector.
Possible low on fluid and also need to reprogram transmission after fluid went down. It could have reset itself .
There are several in that transmission and they can be accessed by removing the transmission oil pan.
Inside the transmission case. It is not servicable without removing and tearing down the transmission.