Yes, you have to torque everything on the drivetrain correctly. The manual calls for 15 ft-lb (dry and clean) on the pressure plate-to-flywheel bolts.
The 3800 Pontiac engine had bolt torque specification is 160 pounds. The head bolts should be torqued in 40 pound intervals.
number 8 reverse torque
what is the torque spec for a 2005 Pontiac G6 Gt brakes
Bell housing bolts and the torque converter bolts.
15 mm socket, but I think they are 3/8 national coarse thread.
18 ft pounds
The amount of pressure you need to tighten nuts or bolts.
80Lbs for flywheel, 10 to 15lbs for pressure plate
The short bolt torque specs for the head gasket of a 2000 Pontiac Sunfire is 43 foot pounds. The torque specs for long bolts is 46 foot pounds.
35 ~ 46 Foot pounds of torque. Pressure plate bolts.
There are two horizontal bolts at the front of the cradle, and two verticle bolts at the rear. You do of course have to deal with the engine, transmission, brakes and suspension also.
The 1995 Pontiac sun fire cylinder had bolt torque specification is 160 pounds. The head bolts should be torqued in 40 pound intervals.