To be short...Yes
Yes. An everyday occurrence of this circuitry is in your kitchen counter split receptacles. The top half of the receptacle is a 15 amp circuit and from the same breaker the bottom half of the receptacle is another 15 amp circuit. A two pole single handle breaker is a common trip. If one of the circuits fed from the breaker faults the other connected circuit will shut off also. If you are talking about slot position in a breaker panel, you can remove the two pole breaker and install two single pole breakers.
120 amps The above answer is wrong. A 60 amp breaker is designed to trip at 60 amps be it a single pole, double pole or a triple pole that is used on three phase equipment. The number on the handle of a breaker is the trip capacity.
A dedicated outlet is a single circuit from a single or double pole breaker to a specific outlet or receptacle for a single specific device or appliance. An example of this would be a circuit for a refrigerator, microwave, dryer, range, etc..This is typically referred to as a "dedicated circuit". A dedicated circuit usually is supplying power to only one or perhaps two receptacles, such as a computer station. An example in your home under current code is your washing machine is required to be on a dedicated circuit. Dedicated receptacle circuits may be either 15 or 20 amp.A dedicated circuit is just what it sounds like. I'ts a circuit dedicated to one particular device. Most receptacle (you may call them outlet's) circuits will power several outlets. A dedicated circuit will power only one specific outlet or appliance. Some examples would be a refrigerator, a garbage disposal, or a microwave.
A GE tandem breaker can be removed and replaced with a GE single pole breaker.
Replacement for American Switch single pole 15 amp circuit breaker
Yes. An everyday occurrence of this circuitry is in your kitchen counter split receptacles. The top half of the receptacle is a 15 amp circuit and from the same breaker the bottom half of the receptacle is another 15 amp circuit. A two pole single handle breaker is a common trip. If one of the circuits fed from the breaker faults the other connected circuit will shut off also. If you are talking about slot position in a breaker panel, you can remove the two pole breaker and install two single pole breakers.
Replacement for American Switch single pole 15 amp circuit breaker
120 amps The above answer is wrong. A 60 amp breaker is designed to trip at 60 amps be it a single pole, double pole or a triple pole that is used on three phase equipment. The number on the handle of a breaker is the trip capacity.
A dedicated outlet is a single circuit from a single or double pole breaker to a specific outlet or receptacle for a single specific device or appliance. An example of this would be a circuit for a refrigerator, microwave, dryer, range, etc..This is typically referred to as a "dedicated circuit". A dedicated circuit usually is supplying power to only one or perhaps two receptacles, such as a computer station. An example in your home under current code is your washing machine is required to be on a dedicated circuit. Dedicated receptacle circuits may be either 15 or 20 amp.A dedicated circuit is just what it sounds like. I'ts a circuit dedicated to one particular device. Most receptacle (you may call them outlet's) circuits will power several outlets. A dedicated circuit will power only one specific outlet or appliance. Some examples would be a refrigerator, a garbage disposal, or a microwave.
A GE tandem breaker can be removed and replaced with a GE single pole breaker.
Replacement for American Switch single pole 15 amp circuit breaker
No, the six outlets are not amperage rated to be connected to a 20 amp circuit. A normal 15 amp receptacle can not be protected by a 20 amp breaker. Change the 20 amp breaker to a 15 amp breaker. This combination will pass code regulations. =============== In the United States, in a home, you can connect two hard-wired (not cord and plug connected) fans and six receptacles (outlets) to a single 20 amp circuit provided the 2 fans do not draw more than 10 amps together. If they are cord and plug connected, this limitation on the fans does not apply. In commercial and industrial installations, power to hard-wired equipment is provided on different circuits than receptacles.
In theory, as many as you want. However, the circuit supplying the receptacle(s) you are using has a maximum capacity before the circuit protective device opens (usually a fuse or circuit breaker). Since appliances come in many sizes / wattages, there is no single answer. Some large appliances require a dedicated circuit with only one single receptacle, so that other things can not be plugged in at the same time on that circuit. Conversely, a 15 amp general purpose circuit could probably handle 100 clocks. first determine how many amps the circuit is fused at. then how many watts the appliances use that are on the same circuit. then you take the watts divided by volts (120) = amps....add them up.
In the US a miniature circuit breaker, sold in a single unit, is about 15$, about the same as a regular breaker. If sold as a double unit, meaning two mini breakers installed into one housing, then it is about 25$.
The current is limited by the fuse or circuit breaker.
Most residential service in USA has both. In the USA 110 to 120 volts is a given and it would be very unusual not to have 220 to 240 volts. It can be easily tested at main panel with a volt meter. Or as an alternative call your power company.
If it was two wires under one screw on a single-pole breaker, that would not be proper, and most probably against electrical code.If it was two wires, each under their own screw on a double-pole breaker, then that would be a 220 volt circuit; each wire going to its own "leg" of the breaker panel.