answersLogoWhite

0


Best Answer

as long as they are the same year p.u or SUV ,yes they program the same i.e--2000 Yukon and 2000 Tahoe are the same programs

User Avatar

Wiki User

โˆ™ 2011-09-13 02:21:49
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: Do you program the GM keyless transmitters the same way you do the Chevy?
Write your answer...
Submit
Related questions

How do you program the keyless remote for a 1998 expedition?

Replacing lost transmittersTake all your vehicle's transmittersto your dealer for reprogrammingif:² a transmitter is lost or² you want to purchase additionaltransmitters (up to four may beprogrammed).To reprogram the transmitters,place the key in the ignition andswitch from OFF to ON eight timesin rapid succession within 10seconds. After doors lock/unlock,press any button on alltransmitters (up to four). Whencompleted, switch the ignition toOFF.All transmitters must beprogrammed at the same time.


How do you program a 1998 Lincoln mark viii key fob?

Programming Keyless Entry Remote Transmitter for 97-98 Mark VIIINOTE: The driver door module (DDM) erases all previously stored keyless entry remote transmitters when programming a new transmitter. If you are adding an additional transmitter, the existing transmitters stored in memory must be programmed at the same time.Enter the permanent factory keyless entry keypad code on the driver's door keypad.Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than two seconds will erase all stored customer codes. The door locks will lock, then unlock, confirming the codes are erased. The existing codes do not need to be erased to program new codes. You might need to repeat this step twice.Press and hold any button on the keyless entry remote transmitter. The doors locking and unlocking confirm the programming.The DDM will automatically associate the transmitter to a personality setting. The first transmitter will be position l and the second transmitter will be position 2. The remaining transmitters, if programmed, will not be associated to a personality setting.If additional transmitters are to be programmed, program each transmitter within 7.5 seconds of the last transmitter.After all transmitters are programmed:A new keyless entry keypad code can be programmed within 7.5 seconds of the last transmitter.Press keyless entry keypad buttons 7/8 and 9/0 at the same time to exit program mode.Wait for 7.5 seconds; the DDM will exit the program mode automatically


How do you program the remote keyless entry for a 1997 Expedition?

Replacing lost transmitters Take all your vehicle's transmitters to your dealer for reprogramming if: ² a transmitter is lost or ² you want to purchase additional transmitters (up to four may be programmed). To reprogram the transmitters, place the key in the ignition and switch from OFF to ON eight times in rapid succession within 10 seconds. After doors lock/unlock, press any button on all transmitters (up to four). When completed, switch the ignition to OFF. All transmitters must be programmed at the same time. My understanding is that 97 ford expeditions are the only year instead of tuurning ignition switch 10 times off and on, you only have to do it 5 times.


How do you program keyless for a Cadillac dts?

Change batteries and press lock and unlock remote at the same time for (8) second.


How do you program a 2001 Saturn L200 keyless entry remote?

You can program the keyless entry remote, for your 2001 Saturn L200, by holding the unlock and lock weapons at the same time. The red light will flash on and off. The remote will be programmed when the red light stays illuminated.


How do you program a keyless remote for a 2001 GMC Yukon?

If it's the same as the 2003 yukon, you just press the "locked" and "unlocked" at the same time for about 5-6 secs


How do you program a key less remote for a 1998 ford expedition?

Replacing lost transmitters Take all your vehicle's transmitters to your dealer for reprogramming if: ² a transmitter is lost or ² you want to purchase additional transmitters (up to four may be programmed). To reprogram the transmitters, place the key in the ignition and switch from OFF to ON eight times in rapid succession within 10 seconds. After doors lock/unlock, press any button on all transmitters (up to four). When completed, switch the ignition to OFF. All transmitters must be programmed at the same time.


How do you program remote control of 2001 ford expedition?

Replacing lost transmitters Take all your vehicle's transmitters to your dealer for reprogramming if: ² a transmitter is lost or ² you want to purchase additional transmitters (up to four may be programmed). To reprogram the transmitters, place the key in the ignition and switch from OFF to ON eight times in rapid succession within 10 seconds. After doors lock/unlock, press any button on all transmitters (up to four). When completed, switch the ignition to OFF. All transmitters must be programmed at the same time.


How to program the remote key fob for a 1999 expedition?

Replacing lost transmitters Take all your vehicle's transmitters to your dealer for reprogramming if: ² a transmitter is lost or ² you want to purchase additional transmitters (up to four may be programmed). To reprogram the transmitters, place the key in the ignition and switch from OFF to ON eight times in rapid succession within 10 seconds. After doors lock/unlock, press any button on all transmitters (up to four). When completed, switch the ignition to OFF. All transmitters must be programmed at the same time.


How do you program remote control for Ford Escape xlt 4x4 2002?

From thrashin: Ford Escape Remote Transmitter Programming NOTE: Make sure remote batteries are OKNOTE: All keyless entry remote transmitters (15K601) must be programmed at the same time.NOTE: All previous transmitter identification codes (TIC's) will be erased when programming mode is entered.NOTE: To program (or reprogram) the keyless entry remote transmitters into the generic electronic module (GEM)(14B204), carry out the following steps. Turn the ignition from OFF to RUN eight times within 10 seconds, ending in RUN. If the GEM has successfully entered program mode, it will lock and unlock all the doors.NOTE: The first TIC must be entered within 7.5 seconds of entering the program mode and additional TICs must be entered within 7.5 seconds of the first TIC. The programming mode is exited whenever the timing constraints are not met. Press any button on a keyless entry remote transmitter, and the doors will lock and then unlock to confirm that each keyless entry remote transmitter has been programmed.If the door locks do not respond for any keyless entry remote transmitter, wait for several seconds and press the button again.Turn the ignition switch to the OFF position, or wait up to five minutes after step 1, to exit program mode. If a keyless entry remote transmitter has been programmed (or reprogrammed), the GEM will lock and unlock all the doors one last time.


How do I program a 1997 mercury marquis key fob?

On my 1995 Mercury Grand Marquis, you must have all the transmitters intended for use on your vehicle. Prior programing is erased and ALL must be done at the same time. 1) Enter the factory keyless entry code., 2) Press the 1/2 button on the keyless entry pad. 3) Press one button on each of the transmitters to be programmed. Each transmitter button must be pressed within seven seconds of the prior one. Each time a transmitter is successfully programmed, all of the vehicle doors will lock and then unlock to verify programming. If they did not lock/unlock, your transmitter was not programmed.


Can you program two remote control keys for a 2003 Astro van to work together as one?

I assume you mean you want more than one keyless entry pendant to work the same van. If the pendants are the same make and type, it should be possible. Consult a local Chevy dealer. You can find out from the manufacturer online how to program them. It has to do with the brand of remote control switch.I've done it before!! good luck


Ow do you program keyless entry for 1996 camaro?

turn ignition on. do not start car. hold down the 2 buttons at the same time for about 8 seconds.


How do you program remote control for Ford Escape 2006?

NOTE: Make sure remote batteries are OKNOTE: All How_do_you_program_remote_control_for_ford_escape_hybrid_2005remote transmitters (15K601) must be programmed at the same time.NOTE: All previous transmitter identification codes (TIC's) will be erased when programming mode is entered.NOTE: To program (or reprogram) the keyless entry remote transmitters into the generic electronic module (GEM)(14B204), carry out the following steps.Turn the ignition from OFF to RUN eight times within 10 seconds, ending in RUN. If the GEM has successfully entered program mode, it will lock and unlock all the doors.NOTE: The first TIC must be entered within 7.5 seconds of entering the program mode and additional TICs must be entered within 7.5 seconds of the first TIC. The programming mode is exited whenever the timing constraints are not met.Press any button on a keyless entry remote transmitter, and the doors will lock and then unlock to confirm that each keyless entry remote transmitter has been programmed.If the door locks do not respond for any keyless entry remote transmitter, wait for several seconds and press the button again.Turn the ignition switch to the OFF position, or wait up to five minutes after step 1, to exit program mode. If a keyless entry remote transmitter has been programmed (or reprogrammed), the GEM will lock and unlock all the doors one last time.


How do you program key fob for a 1997 Lincoln?

Reference 1997 Town Car Owner Guide Page 114 Up to 4 transmitters must be programmed at the same time. 1. Enter the factory keyless entry code. (not personal code) 2. Press the 1/2 button 3. Press one button on each of the transmitters to be programmed. Each transmitter button must be pressed within 7 seconds of the prior one. Each time a transmitter is successfully programmed, all of the vehicle doors will lock and then unlock to verify programming.


How do you program a keyless remote for a 2001 Pontiac?

try holding the lock & unlock buttons down at the same time for 10 to 30 seconds. worked for my 99 grand am.


How do you program a key less entry remote for a 2003 Jeep Grand Cherokee?

I had the same problem. Google "keyless entry remote 2003 Jeep Grand Cherokee".


How do you program remote 2003 Ford Focus?

Turn ignition switch from OFF to ON 4times within 6seconds,leave ignition switch in the ON postion,Chime should sound to indicate that its in the learning mode,Within 10 seconds press any button on the remote transmitters,Do all other transmitters at the same time.


How do you turn the horn sound on for keyless entry for a 2001 grand am?

i am have the same prob with my 1996 Chevy the only why i belive is going to be with a chevt tech2 scanner. the scanner can go into the b.c.m and turn stuff like that on


Are all keyless entry codes the same for 1997 Ford Explorers?

No , each vehicle has it's own factory keyless entry code


How do you replace battery in keyless entry remote in Pontiac Grand Am?

Open the keyless remote and you will see the battery take it out and replace it with the same size.


How do you program keyless entry remote for 1993 Jeep Grand Cherokee Laredo?

I googled the same question...here's what I found. PROGRAM INSTRUCTIONS JEEP 2 BUTTON REMOTESUp to 4 transmitters can be programmed into the receiver at any given time. All transmitters to be used on a vehicle must be programmed during this procedure. (1) Open the driver's door and leave it open during the programming process. (2) Move the mechanical door lock lever on the driver's door to the LOCK position. (3) Insert the ignition key and turn it to the RUN position. (Do not start the vehicle.) (4) After turning the ignition key to the Run position aim the transmitter at the receiver and press the LOCK (right) button for 5 seconds. Once the receiver accepts the programming the door will unlock. Move to Step 5 If you have more than one transmitter you are going to use with this vehicle. Move to Step 6 If only one Jeep remote is used. (5) If additional transmitters are to be used on the vehicle each must be programmed during the programming sequence. (Up to 4 transmitters can be programmed to a vehicle) To program additional transmitters: Return the mechanical door lock lever on the driver's door to the LOCK position and aim the next transmitter at the receiver and press the LOCK (right) button for 5 seconds. Again when the receiver accepts the programming the door will unlock. Repeat step 5 until all transmitters have been programmed. (6) When all transmitters have been programmed to the receiver, the ignition must be turned off and back on within 20 seconds after programming the last transmitter. When this is done, only the transmitters that were programmed to the vehicle during this procedure will operate the locks.


How do you program the keyless entry remote on a 2002 Saturn Vue?

If you just want to replace the transmitter battery on it it does not need to be program it does need to be resequenced. 1 replace the transmitter battery 2 close all doors on the car 3 stand outside of car , on the driver side , and hold at the same time the LOCK and UNLOCK buttons, you should hear the locks cycling close to open position. After that your transmitter is resynched, if it does not work you may need a new transmitter. If you do it does need to be programmed at the dealership and you will need the car there along with any other transmitters you have for the car.


How do you program a keyless entry remote 1997 buick park avenue?

To program the keyless entry remote you hold down the lock and unlock keys at the same time while within 10ft of vehicle to make sure you are within range of the remote for approx 10 seconds. the vehicle will alert with a short horn sound. if it does not respond, repeat. should only take 1-3 tries before it's done


Keyless enty code for a 1995 LS blazer?

I just bought this blazer and it only came with one key my dad had the same year blazer and it had keyless entry