Design wise yes, parts wise no. Parts are not interchangable.
NoNo
No
All Nissan Titan trucks 2004-2009 use the same 5.6L V* engine under the hood.
Yes, Nissan used the same transmission for all of the rear drive ka24s, single cam and dual cam. Even the trucks have the same transmission.
not usually.. but u need to measure the bolt pattern from the toyota to nissan from center to center skipping one hole and measure across, if toyota measures the same as nissan it should fit but make sure you measure the center hole where your hub axle fits, if its the same it will bolt..so there is a way
Possibly. If the wheel size is the same, i.e., 14",15", etc.
6 lug same as Nissan,Toyota
yes it should fit considering that the motormounts are the same on most Toyota trucks. Also make sure the motor you are putting in came out of a truck with the same type of transmission either manual or automatic.
They share many parts but not all are interchangeable. The brake pads & discs in the front are the same on base models. They also share the same engine (1zzfe) so most of those parts are the same. Some of the suspension is the same. Aside from that not much else will fit.
Toyota owns the brand Scion, the motor out of the xA and xB (the 1.5L) is the same motor and I believe transmission from the Toyota Echo. Toyota also owns Lexus. Honda owns Acura Nissan owns Infiniti And the list goes on...
They are part of the suspension.
yes it will if the 89 has the same motor as the 85 most all Toyota 4x4 parts from the 70's to early 90's are interchangable if the vehicles both have the same engines realy the only thing that changed on the trucks is the body style and fuel injection