The watts determine how much energy is taken and how much heat is produced. You need to look at the lumens to see how much light is produced. CFLs produce 4-5 times more lumens than incandescent bulbs, or 3-4 times more than halogens, for the same power in watts.
The fixture manufacturer goes on the side of safety. A 75 watt bulb puts out both more light and heat than a 60 watt bulb. It can make the fixture burn out sooner. For even more light, why don't you go with a florescent and get a 27 watt bulb that gives off the same amount of light as a 100 watt bulb? That will give off far less heat and be far better for your fixture?
The label 60 watts bulb max is referring to each individual bulb, not the total in the light fixture.
Yes, it is only pulling 18 watts.
As long as the fixture in the confined space is approved for confined space and the wattage rating of the fixture is not below 60 watts then there should be no problem using a 60 watt bulb in this situation.
The wattage rating of a recessed light is governed by the amount of heat it can dissipate. The wattage rating is set by a standards organization and has to be adhered to by the manufacturing company. The label that is on the recessed light fixture is the maximum size incandescent bulb that can be used in the fixture. Depending on the bulb size used in the fixture will reflect the amount of watts the recess light will use.
A small bulb is placed inside the open cage of a bronze pendant lighting ceiling fixture. One can purchase these lighting fixtures at Home Depot or Lowe's.
Look at the wattage capacity of the fixture. Some fixtures are limited to 65 watts, some can take much more. If you use a larger bulb than what the fixture was designed for you create a fire risk. If you need to use a larger bulb but the fixture is limited to 65 watts, you need to change the fixture.
The fixture manufacturer goes on the side of safety. A 75 watt bulb puts out both more light and heat than a 60 watt bulb. It can make the fixture burn out sooner. For even more light, why don't you go with a florescent and get a 27 watt bulb that gives off the same amount of light as a 100 watt bulb? That will give off far less heat and be far better for your fixture?
The label 60 watts bulb max is referring to each individual bulb, not the total in the light fixture.
Not legally if the fixture is is rated for only a maximum size bulb of 70 watts. By imposing twice the wattage on the fixture, this action will create an overheating effect that could ignite surrounding material.
Check the amount of watts recommended for the light bulb socket and on the light bulb.
Yes, it is only pulling 18 watts.
h7 bulb type. 35 watts. 55 watts is ok too but becareful with the lighting harness.
Yes. They are well insulated and have thermal cutoff switches.
The best lighting for a bathroom ceiling is a hanging light fixture with more than one bulb. You don't want all of the light in your bathroom to come from a single bulb.
As long as the fixture in the confined space is approved for confined space and the wattage rating of the fixture is not below 60 watts then there should be no problem using a 60 watt bulb in this situation.
The wattage rating of a recessed light is governed by the amount of heat it can dissipate. The wattage rating is set by a standards organization and has to be adhered to by the manufacturing company. The label that is on the recessed light fixture is the maximum size incandescent bulb that can be used in the fixture. Depending on the bulb size used in the fixture will reflect the amount of watts the recess light will use.