Want this question answered?
That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.
It is a tuning fork whose vibrations are sustained (by hammering it continuously in a way similar to the break and make arrangement of electric bell) with the help of an electromagnet.
it would make a noise! silly!
Put it by something which will resonate in sympathy with it, such as a soundbox or sympathetic string. If electricity is an option, electrical amplification can make a sound as loud as needed.
Because they're designed that way. A tuning fork can be, well, "tuned" to have any desired frequency. If these are for tuning musical instruments, they sound like very old tuning forks. The "middle C = 256 Hz" scale was in limited use at one time, but by modern standards (where the A above middle C is tuned to 440 Hz, or in some cases even higher) is a bit on the low side. Tuning your instrument to C=256Hz will make it sound "flat".
many many things, Loose lug nuts which lets wheel make knocking noise. Engine will make a knocking noise if it is really low on oil. Some timing belts make a knocking, slapping noise just before they break.These are just a few examples . Have someone ride in car with you as you duplcate the noise and see if they can determine which part of the vehicle it is coming from.
When adjusting the tune of the strings on a guitar, one will need to mainly focus on achieving the correct pitch by adjusting the knobs on the headstock for each string. The pitch of every string will be in tune with the frequency of an A440 fork of tuning. Only the A string will be in tune with the frequency of a tuning fork at concert / 440 pitch. All other strings are tuned relative to the A string. Turn the tuning keys to adjust the string. tightening the string will adjust the note higher loosening the string will make the note lower.
Because the gap between the rocker and the valve is too big and what you hear is the rocker slapping the valve stem. Get yourself a manual for your car and find the valve gap so you can adjust them properly.
Replace the nitrogen & oxygen air with helium and oxygen. tighten the tension on the vibrating thing (e.g., string) make the vibrating thing smaller, thinner. (e.g., tuning fork)
No, tuning the piano doesn't make the keys taller, but, if the regulation is adjusted on your piano, then that can make the keys taller. Chris, Perfect Piano Tuning, L.L.C., Phoenix, AZ
A fork that you use to make vibration.
They make noise by making it.