use farm grade diesel, its much cheaper per gallon
Yes, alcohol can be used to light a tiki torch. Denatured alcohol or rubbing alcohol can work well for this purpose. It is important to exercise caution when using alcohol as a fuel source, as it is highly flammable.
yes-no problem
If you are talking about the mission then go into ZackBinSpins Locker and put in the code 301 then go outside Frau will take you back into the reception telling you to look after the reception go into spa 1 and the hook on the fish is the KEY put the tiki torch over the hook and it will say TIKI TORCH WITH A HOOK YOUR WELCOME
on misson 2 its the tiki torch
Your average tiki torch uses a 1/2" round wick. Wicks come in cotton or fiberglass. Both work well with tiki torches, but the cotton wicks are consumed during burning, and need to be replaced. Fiberglass "wicks" the fuel very well (which means the flame won't sputter) and don't need to be replaced. Here's more info on cotton and fiberglass wicks:
It's best to use fuels specifically created for tiki torches, and not play around with other combustible liquids. Here's a good blog post that explains it: http://www.fireflyfuel.com/blog/picking-the-right-fuel-for-the-job
The tiki torch you put it to the bottom of the plug
Use the broken tiki torch
Tiki torches are decorative outdoor lights. They can come in a variety of styles and are most often used when attempting to create a tropical atmosphere.
it is in the reception near the front of the desk. it is a tiki torch pole
Tiki torches, a popular summertime backyard ornament, can be purchased at a number of big-box stores, including Walmart, the Home Depot, and Lowes. Online options for purchasing tiki torches include Amazon, eBay, and TIKI Brand.
Tiki torches can provide an inexpensive yet creative touch to any outdoor space. Since these have open flames, it is essential that safety be in mind when using these torches. Above all, the torch should be secure. The last thing anyone wants is to have a tiki torch fall to the ground while lit. A semi-permanent solution would be to dig out a hole and securely sink a piece of PVC tubing that is slightly larger than the diameter of the torch. The torch can then easily be slipped in the hole and taken out when needed.