Eaches is a quantity of measurement equal to what?
Eaches is the plural form of each and is often used to denote a number of individual items taken from a larger package.
There may be 20 cases on one pallet
There may be 10 eaches in one case
So in the above example 1 pallet would be equal to 200 eaches.
Note that the measurement 'each' is entirely dependent on packaging and usage.
The term "Eaches" is often synonymous with "Pieces".
Quantity can have different meanings depending on who is using the term and in what context. What quantity of electricity is being used is different from what quantity of water was needed. Quantity is a measurement, measurements have units. Length is a measurement of quantity, metres or yards are units; Volume is a measurement of quantity, litres or gallons are units etc.
The measurement box of cement is used for measuring quantity of aggregates for mixing with cement, when the mortar/concrete is specified in volume. As the volumetric content of a 50 kgs bag of cement is 35 litres, the measurement box of size equal to 35 litres is made. Generally the inner size of measurement box is 40cm x 35cm x 25cm.
The closeness of a reading or measurement to the actual value of the quantity being measured is called?
A unit of measurement is a definite magnitude of a physical quantity, defined and adopted by convention and/or by law, that is used as a standard for measurement of the same physical quantity. Any other value of the physical quantity can be expressed as a simple multiple of the unit of measurement.
What is one technique used to convert a measurement in one unit into a different unit with out changing the value of the measurement?
This question is invalid as a unit is a term meaning a specific quantity regarded as a standard of measurement and is not itself such a quantity. Answer The question is not invalid, as the 'unit' is a measurement of energy. A unit is used by British electrical utility companies to measure energy consumption, and is short for 'Board of Trade Unit'. A 'unit' is equivalent to a kilowatt hour. A watt, on the hand…
To check the precision of an instrument its apparent measurement must be compared to a known measurement. The difference between the measured quantity divided by the known quantity is expressed as a % precision of the instrument, or calibration. Most instruments when being calibrated are tested against multiple known quantities throughout the range of the instrument. Thus the precision of the instrument is determined throughout it's full range of measurement.