For any electrical appliance (lamps, washing machines, etc.) to operate at their rated power, they must be subject to their rated voltage. This is why both values are shown on their 'nameplates' -e.g. for a lamp: '60 W / 230 V', etc.
As each branch of a parallel circuit is subject to the same (supply) voltage, by connecting all the appliances in a home in parallel with the supply, each appliance will also be subject to their rated voltage. This is the primary reason for connecting appliances in parallel.
A secondary reason is that, if appliances were to be connected in series, and one appliance stops working, then it will disconnect all the other appliances in the home!
So you don't have to turn on all the lights at the same time.
FEEDBACK CIRCUITS. In addition to parallel and series circuits, there are also closed and short circuits.
The types of circuits are series and parallel!
parallel is better
The two basic types of circuits are series and parallel circuits.
in bedrooms we have parallel circuit.
Parallel for main circuits and series parallel for lighting circuits.
They are wired in parallel, series and series - parallel.
In electronics DC stands for direct current. There are three types of circuits in this current. They are the closed, open, and series circuits.
The two main types are series and parallel circuits. From these two circuits comes combinations of different series parallel circuits depending on what end results you need.
series and parallel
parallel