0
OBD Diagnostic Codes
Most vehicles generate computer codes used for diagnosing simple and complex problems. These codes help service mechanics more efficiently locate and repair vehicle problems.
500 Questions
What is code penal code 11350?
Asked by Wiki User
11350. (a) Except as otherwise provided in this division, every person who possesses (1) any controlled substance specified in subdivision (b) or (c), or paragraph (1) of subdivision (f) of Section 11054, specified in paragraph (14), (15), or (20) of subdivision (d) of Section 11054, or specified in subdivision (b) or (c) of Section 11055, or specified in subdivision (h) of Section 11056, or (2) any controlled substance classified in Schedule III, IV, or V which is a narcotic drug, unless upon the written prescription of a physician, dentist, podiatrist, or veterinarian licensed to practice in this state, shall be punished by imprisonment in the state prison.
What are the characteristics of gray code?
Asked by Wiki User
Due to grey code it is less chance to clamp Wrong....
if something is wrong then due to color code it is identified,,
Presuming the question is about Gray Codes, aka reflected binary code, the primary benefit is that it requires only a single binary digit to change when incrementing or decrementing a binary number.
That is, the Grey Code representation of X (base 10) has N binary digits in it. The Grey Code representation of either X-1 or X+1 requires only a single binary digit to change, out of the N digits which make up the number. Normal binary code can require up to all N digits to change when adding or subtracting a single increment.
The advantage here is cleanliness, in particular for mechanical and electrical circuits. Since it is impossible to absolutely synchronize change of digits, in a normal binary representation of a number, incrementing or decrementing it can leave the number in a variety of intermediary states, of which an outside observer cannot tell which is correct. This can cause all sorts of problems when constructing working devices, that otherwise appear to be perfectly designed in the abstract.
For a better explanation of the mechanics and usefulness of Gray Code, look at the Wikipedia article below.
What does love truth but pardon error mean?
Asked by Wiki User
RE: What does "Love truth, but pardon error" mean?
If you look up the definitions for TRUTH and ERROR, you'll find that they have a couple of different meanings. Voltaire lived in the 18th century (1694--1778). Back then people used different meanings for words than what we use today.
"Love TRUTH (honesty; integrity; truthfulness), but forgive ERROR (wrongdoing; sin)." It means give praise when people do good, but when people do things wrong, we should try hard to forgive them because all people make mistakes.
When error code read p1391 ckp or cmp sensor signal intermittent what do that mean?
Asked by Wiki User
What is 1997 fault code p 1744 description?
Asked by Wiki User
The Chilton repair book : P1744 Torque Converter Clutch (TCC) System Mechanically Stuck in Off Position
UMMM, HAD A 98 TAURUS W/ THE SAME CODE. IT IS A GENERIC CODE... WHAT YOUR CAR IS TELLING YOU IS IT NEEDS NEW SPARK PLUGS...
BEEN THERE, DONE THAT...
IF YOU ARE NOT HAVING SHIFT PROBLEMS, THEN TAKE MY WORD FOR IT, OR PAY 2500+ JUST TO FIND OUT I WAS CORRECT...
What does P0300 OBD trouble code mean and?
Asked by Wiki User
Random OR Multiple Cylinder Missfire
It means you have several cylinders not running correct.
Be carefull! you can spend huge money and not fix this!
1st, Compresion test ond fresh spark plugs, check and replace Air cleaner if needed. Be aware that things like worn out camshaft lobes can cause this so if this is easy to check, do that before moving to # 2
2nd Pay a good tech with a scan tool that can see the sensors and engine run condition in real time to diagnose it.
Sonata 2009 obd 2 port location?
Asked by Wiki User
OBD connectors are all within a foot of the steering column, usually just below the knee level, on my daughters Santa Fe it was behind a square panel on the left of the steering column
What does obd code p0300 mean?
Asked by Wiki User
P0300 Diagnostic Code - Random Misfire
Symptoms.
Engine may stumble or miss
Engine may be hard to start
you may notice no issues
Cause
Failing spark plugs or spark plug wires
Bad coil or coil pack
Failing oxygen sensor(s)
Bad fuel injector or more than one
Stuck exhaust valve
Bad catalytic converter
EGR valve or valve passage clogging
Bad camshaft position sensor
Bad PCM or ECM
The Fix
Best first action is a tune up, new plugs, wires, inspect all hoses and wire connections then reset the code. If it returns you will need to narrow it down to a system, coils and coil packs should be tested, catalytic converters for function ( do you smell rotten eggs?). A misfire that jumps cylinders could indicate a lean condition, do you have any other codes along with the 300? this will help clue you in to the source, check valve function to make sure they are opening and closing fully.
This is probably pone of the most difficult codes to troubleshoot, so start with the basics and work your way into the more expensive options, in many cases a good old tune up solves the problem, back it up with a fuel system cleaning and see where you stand.
Random/multiple misfire.
How do you correct code p1682?
Asked by Wiki User
P1682 A/T FI Signal A High Input (Acura, Honda)P1682 Charging System Voltage Too Low (Chrysler, Jeep)
How do you fix a error code P0446 on my 2007 ford explorer?
Asked by Keith65
Evaporative Emission Control System Vent Control Circuit Malfunction, look for faulty vent valve or a short on the vent control circuit.
Why wont your automatic transmission shift into third gear?
Asked by Wiki User
Depending on the vehicle, lets say you own a Chrysler, the electronic transmission has a mode referred to as "limp in" mode. Your vehicle will run only in second, or maybe third gear(transmission). In most cases, if there is something mechanically wrong with your tranny, you will hear it or feel it, or have total failure.
In the case of an electronic problem, the check engine light accompanied by the inability to shift through the gears could be due to a faulty governer pressure sensor and or solenoid. Occasionally with Chrysler electronic trannys, the solenoid gets frozen and will not engage with the correct force. Fault code will indicate Governer pressure sensor voltage too low, etc. This can be remedied easily by purchasing the parts over the internet and dropping the transmission pan, removing the valve body, and replacing the two parts.
