The Fiat Uno 1.1 Fire (Fully Intergrated Robotic Engineering) motor is the same in the Fiat Punto 1.1. The torque settings as per Autodata is
Camshaft carrier cap - M8 x 1.25 20Nm or M8 10Nm
Camshaft gear - 70Nm
Anything else, just ask
Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.
Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.
There isn't a specific torque for the little 8v fire engine..and the head bolts need to be initially tightened to 30Nm and then a further 90 degrees twice over..remember also to use new bolts because the old ones will have stretched..
i asume you know your spanners so yes it is a straight forward job. and to help you on your way the torque settings are Fiat Punto Fire engine Stage 1 30Nm/22LBf ft Stage 2 59Nm/43.5LBf ft
I need a copy of the wiring diagram for a fiat mia
* Fire Bird * Fiat
The engine number on a Fiat Uno Fire engine should be on a metal plate along the bottom side of the chassis. If the number is not there, contact a Fiat dealer to help locate the proper engine number for your vehicle.
Suzanne Fisher Staples' Shiva's Fire is set in Madras, India.
Check the camshaft sensor. If the sensor is bad or not getting power, then the engine will not fire and the injector will not get a signal.
15w/40 Semi-Synthetic. This is assuming your car is a 1.2 petrol FIRE engine. If Diesel, check with your local motor shop or call a Fiat Dealer because I don't know!
100 Ft. lbs
If the camshaft sensor is not operating properly, then the engine could suffer lower mpg. The sensor is what causes the engine to fire at the proper times and this is critical for better economy.