Change relay's 30 (ecu) and 160 (fuel pump) also get your throttle body cleaned as it's an idle speed problem... when you 'dip the clutch' near trafic light's, do your RPM drop to say 500 then bounce back up to 1000? if so then the relays will fix your problem... its very commen on the 1997 gti's and easy to solve =P
check your oil pressure.... that's what that light is for. if oil pressure checks out the replace sensor
Warning for Change oil schedule or Low oil pressure. Check also the Oil sensor malfunction.
When "low tire pressure" shows up hold down on the RESET for several seconds
The easiest way to reset the 2008 Ford focus low tire pressure sensor is to remove the fuse. Keep the fuse out for 10 seconds and then replace it to the original slot.
Oil Pressure Sensor Testing 1. Test and verify the engine oil pressure. If no or insufficient pressure exits, oil pressure problem exits and gauge and sensor are operational, repair oil pressure problem. 2. Check the appropriate fuse before attempting any other diagnostics. 3. Unplug the sensor electrical hardness. 4. Using an ohmmeter, check continuity between the sensor terminals. 5. With the engine stopped, continuity should not exist. Ø The switch inside the oil pressure sensor opens at (6) psi or less of pressure. 6. With the engine running, continuity should exist. 7. If continuity does not exist as stated, the sensor is faulty.
If the hold light keeps flashing on a Kia Sportage a sensor may be malfunctioning in the light. The flashing light could also indicate that a speed sensor is going bad.
what is advantages of pressure sensor?
They are easy to change. Here is an article on how to test them. Oil Pressure Sensor Testing 1. Test and verify the engine oil pressure. If no or insufficient pressure exits, oil pressure problem exits and gauge and sensor are operational, repair oil pressure problem. 2. Check the appropriate fuse before attempting any other diagnostics. 3. Unplug the sensor electrical hardness. 4. Using an ohmmeter, check continuity between the sensor terminals. 5. With the engine stopped, continuity should not exist. Ø The switch inside the oil pressure sensor opens at (6) psi or less of pressure. 6. With the engine running, continuity should exist. 7. If continuity does not exist as stated, the sensor is faulty.
Oil Pressure Sensor Testing 1. Test and verify the engine oil pressure. If no or insufficient pressure exits, oil pressure problem exits and gauge and sensor are operational, repair oil pressure problem. 2. Check the appropriate fuse before attempting any other diagnostics. 3. Unplug the sensor electrical hardness. 4. Using an ohmmeter, check continuity between the sensor terminals. 5. With the engine stopped, continuity should not exist. Ø The switch inside the oil pressure sensor opens at (6) psi or less of pressure. 6. With the engine running, continuity should exist. 7. If continuity does not exist as stated, the sensor is faulty.
flashing blue means you have an electrical issues with the coolant sensor. you probably have a bad sensor that needs replacing in the coolant bottle hope that helps Phil
where is the nock sensor on my 95 toyota 4runner
The fuel pump pressure sensor monitors the fuel pressure of the vehicle.