Fixture where socket is inserted should be grounded to body
where is the ground wire for the brake and turn signals on 2002 silverado chev pu. also do you have a copy of the wiring>
Black=Ground Purple=blinker Blue=light+brake
The ground wire going from the cab of the truck to frame and/or the ground wire going from the back of the motor to cab ground. The reason is that the ground wires lay across the exhaust manifold and get burnt off after a years of use.
green... right turn yellow...left turn brown...marker and stop white....ground
The 1990 VW Jetta turn signals will not work when the ground wire is broken or corroded. The turn signals may need the lightbulb's replaced.
A bad ground wire is the most common cause of turn signals and brake lights not working. The ground wire connection might be corroded.
check for a loose ground wire
Might be bad ignition switch?? Check the ground wire as well. Check and clean if corroded: The Ground strap/wire from the frame to the engine The small ground wire from the battery to the body The Ground wire from the battery to the engine.
yellow left turn,green right turn,brown tail lights,white ground on standard 4 wire system brake lights will work off turn signals.
Sounds like a bad turn signal relay or you may have a loose ground wire on the circuit.
WHAT ARE THE WIRE COLORS FOR BRAKE AND TURN SIGNALS ON 1999 PONTIAC IN ORDER TO HOOK UP TRAIER HITCH PLUG?Not positive yeLL0w wire Left turn signal, riGht Green wire once you have the turn signal wiring hooked up the brake lights will automatically work because the brake lights work through the turn signal wiring, brown running lights, white ground.
The ground wire on a typical Chevrolet truck should be located at the rear of the vehicle. The wire should be white in color, and should be attached to the frame by a screw. You may need to remove the tail light housing and trace the wire from there as the location varies on different models and years.