Tighten the bolts in a pattern as such; 8 6 2 4 10
9 3 1 5 7 So if you were looking straight down onto the head, the first bolt you'd tighten would be the center one, closest to you. The second bolt you'd tighten is the center one farthest from you. The 3rd would be one left for middle closest to you, 4th would be one right from center, farther from you...Make sence? Tighten them all in that sequence, to 29 ft-lbs. After they are all tightened in that order, start from 1 and tighten them all to 51ft-lbs. Then finally, tighten them all down to 72ft-lbs. Make sure to follow that order every time. If a bolt makes a wierd noise while you are tightening it, loosen the bolt, and retorque it from the 1st step.
Torque specs
What are the torque specs for a 2001 Honda Passport head gasket
The piston rod torque specs for a 2002 Honda accord 4 cylinder are 151 ft lbs
what is the torque on front wheel bearings for 1998 honda accord
21 lbs
The valve cover torque specs for a 1989 Honda Accord is between 20 and 25 pounds per square inch. Proper torque is important to keep the cover in place without causing damage or leaks.
They need to be torqued to 22 lb.ft and then turn them 180 degrees in 2 steps start from the center and work out. Read more: 1998 honda accord 2.3L head bolt torque specs - JustAnswer http://www.justanswer.com/honda/1k1jk-1998-honda-accord-2-3l-head-bolt-torque-specs.html#ixzz1pntfWIDI
97 honda accord headbolt specs
24 - 29 nm
According to the 1994-1997 Honda Accord Service Manual the torque specs are: 74 N.m (7.5 kgf.m. 54 Ibf.ft)
head torque specs for 2002 honda rancher
34 ft-lbs according to haynes manual.