Check fuse # 16 - 20 amp - for Hi Beam Headlamps and Hi Beam Indicator
Its the multiuse switch on the high beam/turn signal indicator. You can get a new switch installed for about $400.
It is on the signal light switch. Pulling it toward you will change from High to Low beam lights and vice-versa 7T77T7
Pull turn signal lever?
The horn, The signal lights, The brake lights, The back up lights, Flashing the high beam headlights,
The dimmer switch if for the instrument panel lights. The high and low beam switch is for the headlights. On most older cars the high and low beam switch was on the floor. Most cars have it on the turn signal lever now.
PULL THE TURN SIGNAL LEVER TOWARD THE DRIVER. THAT CHANGES FROM LOW TO HIGH BEAM
Bulbs blew
i have a 96 Town car and the high/low beam switch is on turn signal. push signal switch forward for high, back for low.
High-beam lights are your sencondary head lights in any veicle. They can usually be turned on with the same botton you use to turn your head lights on. High beam lights are use to see farther and wider in dark areas.
These lights have 2 different "lights" in each of them. This occurs frequently. Change out the bulb and everything will be working fine once again.
hmm as you ask what happened to high beams, i am going to assume that low beam works. id this is correct i would say that your low/high beam switch needs replacing
High-beam lights are your sencondary head lights in any veicle. They can usually be turned on with the same botton you use to turn your head lights on. High beam lights are use to see farther and wider in dark areas.