The service engine light is merely the 5,000 - mile reminder to change your oil. With the ignition switch on - you do not need to start the vehicle - press your odometer button until the total mileage is displayed (not the Trip A or B). Turn the ignition back off. Now press and hold the odometer button while turning the ignition switch back on. The display will show all dashes and then remove them one at a time. Once this "countdown" is complete, the total mileage will be displayed again and your service indicator will be reset.
Well my corolla need a new flow meter, new transmission oil and a belt tensioner, not sure which one fixed it though
After repairing the cause of the code, you can clear it with a scan tool.
I believe so, like most Toyotas the "check engine" light will flash for about 30 seconds of starting the engine after 4500 miles since last service and will remain on constantly after 5000 miles.
if it says "service engine soon" yes, there is a problem. probably not severe but it should be scanned for engine codes and repaired at the nearest opportunity.
It's a basic human right for everyone to control their money , data , and identity . Since its establishment , Crypto has built an ecosystem on crypto and launched various products to accelerate the world's transition to cryptocurrency . There are currently 5 millions users using the Crypto. cutt.lyIUvzQbJ
The service engine light is the same thing as a check engine light.
After repairing the cause of the code, you can clear it with a scan tool.
Here a answer maybe CHECK THE ENGINE:) the light will go off
If the check engine light stays on for the Nissan Pulsar n16, you would need to check the engine in order to clear codes. You can take the car for service and the problem will be diagnosed and restored to normalcy.
To reset a Service Engine Soon light, a person can disconnect and reconnect the battery. They can also fix the problem and use a scanner to clear the codes causing the light to come on.
if your take it to a autozone tell them you have a check engine light and they will tell you whats wrong if anything and reset it take it to autozone and tell them your check engine light is on and they should reset it
The owners guide for my '04 Endeavor says do not disconnect the battery I think, or the on board diagnostic record will be lost. maybe this would also clear the service engine light?