Toyota 4Runner
Swimming Pools
Late Model 1979-New Ford Mustangs
London

How can you be sure your vacuum line in sucking properly when you have underground piping?

656667

Top Answer
User Avatar
Wiki User
2015-07-15 21:02:14
2015-07-15 21:02:14

What is the pressure on the gage on top of the filter say? Some pools operate with about 12 # reading. Some operate at 25, 30 & 35 #'s. Still others operate within the 4 to 8 # range. If yours is much higher than those very high indications it could be that your filter needs cleaning. If it is reading zero - it could be a faulty gage or plugged suction line, skimmer basket, pump basket. You could also feel at the skimmer port with your hand to see how strong the flow is. If you can see water circulating at a rather swift movement that is an indication you have flow.

Purchase a book at your local big box hardware store for the basics on pool care. Well worth it in aggravation and mistakes.

k

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

I don't see how the sucking capacity of a vacuum would be measured in units of length.

User Avatar

I have a friend who owns this exact same vaccum and it works beautifully for the price . The sucking power on this vaccum is excellent .

User Avatar

The cast of Sucking Is a Fine Quality in Women and Vacuum Cleaners - 2006 includes: Michelle Duncan as The Wife Rebecca Hazlewood as The Mistress

User Avatar

If a vacuum oven is not drying properly as in a food dehydrator, it could be due to a loss in vacuum. Check to make sure there are no cracks and the gaskets are sealing properly.

User Avatar

It may not be blowing out pressure. But it is actually sucking in Air. The fuel tank has to be sealed and hold a vacuum for emissions. Because it sucks air in means it is working properly

User Avatar

Material 1. Geyser 2. Piping 3. Elbows 4. T Pieces 5. Vacuum valve 6. Pressure valve 7. Safety valve

User Avatar

This vaccum is excellent at sucking up even things as little as confetti and rice with no problem whatsoever.

User Avatar

Because there is a vacuum in the crankcase. There should be a slight vacuum due to the positive crankcase ventilation. If there is excessive pressure or vacuum, you have ring blow-by, meaning your rings are shot.

User Avatar

Yes It Wil If The Vacuum Leak Is In A Hose That Gos To you Transmission

User Avatar

They work by sucking all the air in the bag therefore making it air tight.

User Avatar

The Bissel pet vac has a lot of suction power to get dander and fur out

User Avatar

A vacuum leak on a 1999 Ford Ranger can be located using an automotive stethoscope. It can then be move around the engine to detect the sucking noise of a leak.

User Avatar

there are three ways . 1/but your vacuum on reverse . 2/ blow in to it. 3/wack on the couch a few times to loosen then blow. 4/put it back in cupboard and leave it to mum.

User Avatar

A vacuum sealed bag will keeps it seal for a month if properly used.

User Avatar

The same as the floor vacuum inside the house but instead of it sucking air it sucks water through the filter. Just run the pool hose from the pool vacuum to the vacuum plate over the top of the leaf basket. then turn on the pump and runi t along the floor of the pool.

User Avatar

Look for a loose vacuum line. Sounds like it is sucking wind from somewhere.

User Avatar

It installs between the turbo and throttle body in the intake piping. It installs with hoses and clamps. It has a vacuum line that connects to the manifold that open the valve when the throttle closes and vacuum is present in the manifold.

User Avatar

The vacuum hoses are very important in a 1991 Beretta. Without the vacuum lines, the engine will not run properly, and the power brakes will not function.

User Avatar

Whale sharks open their mouths and suck in their food using a sucking power stronger than an average vacuum.

User Avatar

Yes, the power brakes should work properly provided that the booster, check valve and hoses are in good condition and is getting the correct vacuum flow from the engine. The vacuum canister is a vacuum reservoir for the HVAC (Heating, Ventilation, Air Conditioning) controls.

User Avatar

This vacuum has a 1200-watt, high-output Miele-made Vortex Motor System,and a dial to adjust the suction.

User Avatar

You can tell that your vacuum cleaner needs to be replaced when it quits working properly. Signs of that include the belt quits turning or the vacuum quits picking up dirt.

User Avatar

a big hole sucking everything up. only the hole has a cover. like a vacuum. it is a suck up with a cover up

User Avatar

When sucking the straw, we force the state of vacuum and atmospheric force act on liquid surface pushing the liquid up the straw.

User Avatar

No, it is the opposite. Think of a low-pressure pocket as a vacuum cleaner: it is creating a vacuum, thereby sucking in the outside (higher pressure) air. Therefore, the flow is from high pressure to low pressure.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.