answersLogoWhite

0


Best Answer

You can go to your local auto shop or most hardware stores and look for a brass extension. most American oil pressure sending units usually have 1/8 npt or 1/4 npt threads.

User Avatar

Wiki User

โˆ™ 2011-09-13 04:52:31
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: How can you fit a oil pressure sending on a 1995 5.0 ford racing engine if you have a sending unit that only lights a light but the new pressure sending unit for a gauge dont fit because of clearance?
Write your answer...
Submit
Related questions

How do you Remove oil pressure sending unit on 2.7 liter Chrysler engine?

Remove the oil pressure sending unit retaining ring. Remove the wiring harness from the sending unit. Poll the sending unit out of the engine.


Where is the oil sending unit on a 1995 Pontiac Trans Am?

Oil pressure sending unit Where is it at on the engine


Where is the oil pressure sending unit on a 1994 ford F350 7.3 liter power stroke?

The 1994 Ford F3 50 pickup truck 7.3 liter engine oil pressure sending unit can be found on the left-hand side of the engine. The oil pressure sending unit will be near the front of the engine.


Where is the oil pressure sending unit on a 6.0L GM engine?

I'm going to add an oil pressure gauge to my 05 GTO. Where's the sending unit located on the 6.0 L engine


What does the oil pressure sending unit do?

Measures the engine oil pressure and sends this information to the oil pressure gauge.


4.7l dodge oil pressure sending unit location?

The oil pressure sending unit on the 4.7L engine is right above the oil filter.


Where is the oil pressure sending switch on a 2001 Explorer located?

On the 4.0 L OHV engine, the oil pressure sending unit is on the driver's side of the engine, located below the power steering pump.


Where is a oil pressure sending unit on a 1986 chev cavalier?

The 1986 Chevrolet Cavalier oil pressure sending unit can be found on the left-hand side of the engine. The oil pressure sending unit will be above the oil pan.


Where is the oil pressure sending unit on the 93' Toyota pickup 22 Re engine?

In the engine, usually in an oil pressure port


How do you replace jeep Cherokee sending unit?

There is more than one sending unit, such as engine oil pressure sending unit, engine temperature sending unit and fuel gauge sending unit to name a few. Need more info.


What does an oil sending sensor do?

They "sense" the oil pressure inside the engine. If you have an instrument panel oil pressure gauge the sending unit sends an analog signal to the gauge. If you have an oil pressure "idiot light", the sending unit turns the light on when the oil pressure is low.


Where is the oil pressure sending switch on a 1989 GMC Sierra not the fuel pump relay?

The oil pressure sending unit on a 1989 GMC Sierra is located slightly above the oil filter. You will need a flashlight to find it. It may be hard to recognize it because it should have a heat shield around it as well. Look for its wire coming down from the engine compartment and follow it to the oil pressure sending unit. Drain your engine oil and remove the oil filter to make changing the oil pressure sending unit easier.


Where is the oil pressure sending unit on a 360 Dodge engine?

It is on the back of the engine, just to the side of the distributor.


Where is the oil pressure sending unit located on a 1999 Buick park avenue ultra?

Oil Pressure Sending Unit LocationBuick positioned the oil pressure sending unit on the engine block, just below the power steering pump.


Where is the oil pressure sending unit located on a Chevy 4.3 liter v6 engine?

The oil pressure sending unit, on a Chevrolet 4.3 liter V-6 engine, is located on the left side of the engine, just above the oil pan. The sensor is near the front of the engine.


Where is the oil pressure sending unit on a 89 Ford Bronco II?

The oil pressure sending unit is on the front drivers side of the engine towards the bottom it has a hex shaped stud screwed in the engine with the sending unit screwed into the end of the stud. It has the electrical line on the tip.


How do you check the oil pressure?

You need to remove the oil sending unit and install a oil pressure gage in it's place then start engine and read gage. Iwould tell you were the sending unit is but you did not say what you are working on. You need to remove the oil sending unit and install a oil pressure gage in it's place then start engine and read gage. Iwould tell you were the sending unit is but you did not say what you are working on. You need to remove the oil sending unit and install a oil pressure gage in it's place then start engine and read gage. Iwould tell you were the sending unit is but you did not say what you are working on.


Where is the oil pressure sending unit located on a 3.1 liter GM engine?

by the oil filter, under engine.


Where is a oil pressure sending unit located on a 2003 Cadillac deville?

The 2003 Cadillac Deville oil pressure sending unit is located on the left-hand side of the engine. The oil pressure sending unit will be three inches above the oil pan.


Where is the low oil pressure switch on a 94 S10 Chevy?

The oil pressure sending unit on a 4.3 engine is located on top of the engine, at the very back of the engine, next to the distributor on the drivers side. I remove the distributor to gain better access to the sending unit.


Where is the oil pressure sending unit on a 1993 ford F-150 5.0L engine?

Oil pressure sending unit is right behind your oil filter base.


Oil Pressure Sending Unit location for 2001 Grand Marquis?

Where is it located on the engine


When stop engine oil pressure comes on in Cadillac Seville 1978?

If you problem is that the gauge shows oil pressure with the engine off, you have a gauge or sending unit failure.


Where does the hot wire lead to from the sending unit on a 1986 Chevy s-10 pickup?

Which sending unit? Oil pressure sending unit? Engine temp sending unit? Fuel gauge sending unit?


Can you adjust the valves on a 1995 1.6 liter 16 valve engine?

yes you can adjust the valve clearance of the engine of your suzuki. they use a special tool to make the clearance of the valve. better to ask an expert to do it because if you make mistakes on the adjustments your engine will be damage. yes you can adjust the valve clearance of the engine of your suzuki. they use a special tool to make the clearance of the valve. better to ask an expert to do it because if you make mistakes on the adjustments your engine will be damage.