Buy a bracket at auto parts
Using a sharpie marker, hold the license plate up the the front bumper and mark the bolt holes on the bumper and then using a drill gently apply pressure and drill through the bumper, be sure there are no wires behind where you are drilling and not to drill in too far, then attach the license plate with two bolts and nuts.
In front of the engine and behind the front bumper. If you have a drivers license you should not be asking this question.
To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
yes it will
yes.......
on the bumper?
The horn is on the left side under the corner of the bumper. If you take the bumper off you will know it when you see it.
The horn is located behind the front bumper fascia
Usually
The horn is located behind the front bumper fascia
The horn is located behind the front bumper fascia
it is inside the front right bumper by the marker light