Pop off the speaker grill and remove the three screws securing the panel to the door frame. You do not have to remove the screws holding the speaker to the panel. Remove the window crank. There is a "U" shaped retaining spring holding the handle to the spindle. It can be removed with a special tool or just by pressing in on the panel and loosening the clip with a small flat blade screwdriver. Remove the screws in the arm rest and above the interior door handle lever.
Pull the panel from the door - be careful of the speaker wires - carefully undo the quick connect.
From the top corner, pull down on the plastic sheet.
Remove the square white plastic box that is used as a guide for the control bars.
Locate the exterior handle mechanism. There are 2 10mm bolts that hold the handle to the door frame. Remove them with a ratchet and extension.
Pop the retaining clip (it's green for the left door) free from the lock cylinder control rod, then pull the rod from the back of the lock cylinder.
Covering the back of the lock cylinder is a metal plate. Holding the plate to the cylinder is another "U" shaped spring clip that can be pulled down with a flat blade screwdriver.
After removing this clip, the metal plate will separate from the cylinder. The culinder can then be pulled free from the inside and the handle from the outside.
Reverse the procedure to reinstall.
The LX in Honda Civic LX refers to the car's design trim. It means that the Honda Civic has a special exterior design that is different from the base design of the Honda Civic.
How to remove factory stereo from 2001 honda civic?
Yes, but you will need 1999-2000 head lights, fenders, grill, hood, front bumper and rear bumper.
how do i deactivate the immobilizer from my honda civic 2006
How to remove the ac compressor housing in a honda civic 2001
how to remove front passenger seat of 1996 Honda Civic EX 2 door coupe
its a Honda civic Si... more power, stiffer suspension for better handling, and some styling differences on both the interior and exterior.
The dashboard on a 1991 Honda Civic is held on by several screws. Loosen and remove all of the screws. Then proceed to pull the dash out.
Depends on what the exterior color is. The code is on the drivers door panel.
The 1991 Honda Civic front bumper is secured by eight retaining bolts. Remove the retaining bolts. The bumper will come off.
The flasher relay on a 2004 Honda Civic is located on the interior fuse box. To remove it, simply unplug the unit from the fuse box.
Begin by removing the tire and wheel from your 1993 Honda Civic. Remove the brake assembly and the brake rotor. Remove the axle retaining bolts. The axle will come off.
cause its a civic that Honda makes
The spoiler on a 1997 Honda Civic is attached to the trunk. Open the trunk to gain access to the mounting hardware. Loosen the hardware and remove the spoiler.
front or back
I don't think you can
upper or lower?
with hand and tools...
it pulls out.