Remove the inside door panel of your 1993 Chevrolet Lumina. Remove the passenger mirror wiring harness. Remove the passenger mirror retaining bolts. Reverse the process to install the new passenger mirror.
Chevrolet Lumina. Remove the wiring harness or the mirror linkage. Remove the mirror retaining bolts. Reverse the process to install the new passenger side mirror.
Passenger mirror access is same as drivers side. Three screws accessible inside door panel to remove entire mirror assembly. To remove mirror within the mirror assembly it just pulls off - snap fit of mirror mount to drive.
Begin by removing the inside passenger door panel. Remove the wiring harness from your passenger side electric mirror. Remove the mirror retaining bolts. Reverse the process to install your new electric passenger side mirror.
remove door panel then remove screws behind mirror. remove door panel then remove screws behind mirror.
The drivers side mirror on a 1970 Cutlass is easily replaced with just a screwdriver. The mirrors have no electrical wires to connect. Remove the screws holding the mirror in place, then remove the mirror. Re-connect the new mirror, adjusting the placement to fit securely against the body of the car, and insert new screws.
on top of door panel behind the mirror. remove the plastic cover by prying it off. remove the mirror nuts, and then remove mirror. if it has mirror adjustment cables on it. just remove these cables, and put on with new mirror if needed.
* Remove the mirror trim cover from the door panel * Remove the three mirror retaining nuts and detach the mirror from the car
Which mirror? Just guessing you mean the door mounted mirror. Remove the inner door panel. There will be two nuts holding the mirror on. Remove them and pull the mirror off. If you mean the windshield mounted mirror, there is a small Allen or torx screw holding it on. Loosen it, slide the mirror up and remove.
# Remove the door trim panel and watershield.Disconnect the electrical connector from the mirror # Remove the retaining nuts and detach the mirror from vehicle
take inside door panel off or loose enough to get to the 3 nuts that hold the mirror on.
The passenger side mirror on a 2001 Toyota Sienna is mounted by screws. To replace the mirror remove the mounting screws and unplug the wire clip.