The 1999, 2000, 2001 C70 engines that are HT are the 2.4 L Engines. The LT engine is the 2.3 L but it produces more horsepower than the HT.
LT motor abbrevation
The different testing steps of HT and LT panel include commissioning, sanctioning, erection and the CPP set. All this is done in the servicing of the transformers and the HT/LT control panels.
lt pannel is a iow tensan pannel. lt pannel work is 240v and 440v. ht pannel is a high tensan pannel . ht pannel work is 11kv,33 kv ,66kv, 120kv
It's the voltage: HT high voltage LT low voltage Tension = voltage (French?)
Dielectric Strength of Vacuum is more than that of Air. In HT voltage is more than LT. So VCB is used in HT & ACB in LT. Rakesh Gaikwad
ht motor is to be fed with more than 415v like in kvolts. all the other operated below 415 volts are lt motors
An LT panel is a device that receives power and distributes it to other devices and boards. An HT panel is the same thing except it is used for high tension cables.
to reduce Current and Coast
because our system form factor is 1.1
Frist putt of the main incomer HT side then Rack out the breaker and put the LOTO after that Discharge the cable Both side (HT/LT).
Yes. For any problem or short circuit on LT side there are lot of chances for HT winding to get affected. Usaually the weakest point gets affected, it may be tap changer or the HV Windings. Electrix Vishnu
HT drives are the pumps or motors operate at more power typically more than 0.5 Amps at 110 or 220 V DC whereas LT drives operate at lesser power less than 0.5 Amps at 24 V DC or 240 V AC.