Changing the way of the battery will reverse the electron and conventional current flow. By using an AC (Alternating Current) power supply instead of DC (Direct Current) the flow of current can be altered.
by using a voltmeter on it. it could be warm to the touch. or if its 120 volts/15 amp touch the hot and u should get a little zap ;)
you stick you finger on it
The purpose of an ammeter is to sense and display the magnitude of the current flowing through it. When connected in series with a branch of an electrical circuit, the meter displays the magnitude (and direction) of the current in that path ... which you can't otherwise tell just by looking at the circuit.
Current = (Voltage across the circuit) divided by (Total resistance of the circuit). The current is the same at every point in the series circuit.
In shortg circuit current is infinitive.
Direct current circuit.
In an electric circuit, ratio of current and voltage is constant which is known as the resistance of the circuit. If voltage or current is to be changed the resistance has to be changed. You cannot keep an invariable resistance in the circuit and increase current while keeping voltage as constant.Hence to vary the voltage or current in a circuit different equipments like rheostat,potentiometer are used.
You can measure current - or the lack of current - with an ammeter.
Current in a series circuit travels in one path. This is because a series circuit is only one path. current in a series circuit stays the same thoughout the circuit this means that if in the beginning of the circuit there are 2 amps of current there will be the same ammount of current in the middle and in the end of it. if you don't understand this please tell me and ill explain in a better way.
The purpose of an ammeter is to sense and display the magnitude of the current flowing through it. When connected in series with a branch of an electrical circuit, the meter displays the magnitude (and direction) of the current in that path ... which you can't otherwise tell just by looking at the circuit.
The current in a circuit is reduced to prevent the circuit from over load.
If the word unconnected was changed to uninsulated then this type of scenario would be known as a short circuit.
Current = (Voltage across the circuit) divided by (Total resistance of the circuit). The current is the same at every point in the series circuit.
In shortg circuit current is infinitive.
A simple method for altering the magnetic flux would be to change the amount of current flowing in the coil or circuit. Generally speaking, more current, more magnetic flux, and vice versa.
The current flowing in an electrical circuit.
DC = direct current.
You should study up on Kirchov's Current Law (KCL). It is the means of answering your question and a tool for understanding all parallel circuit configurations.AnswerKirchhoff's current law will tell you that the supply current is equal to the sum of the branch currents.
In a circuit , current is inversely proportional to the resistance.