when they break through the coffin they lose all strength and give up on doors
If you just barely touch the brake pedal the brake lights will come on but the brakes will for all intent and purpose not be applied.
Get down on the floor board and look up at the brake pedal arm. You will see a switch that the arm hits when no pressure is applied to the brake. Twist the switch and adjust so when you barely touch the pedal the brake lights come on.
Vacuum brake booster is defective or the hose going to the booster is leaking.
The engine computer through the brake light switch.The engine computer through the brake light switch.
Through on the floor
One possibility is brake(s) locking up.
You should do that through the master brake cylinder.
yes they have brake boosters
The hose that your brake fluid flows through when u mash the brakes
The main function of brake hoses is to carry brake fluid through the hydraulic brake system in an automobile. Brake hoses are also used measure a vehicle's horsepower.
Get down on the floor board and look up at the brake pedal arm. You will see a switch that the arm hits when no pressure is applied to the brake. Twist the switch and pull out of bracket and then remove wires. Do reverse when installing new switch adjust so when you barely touch the pedal the brake lights come on.
Screw taking special vacuum brake system is in the winding cursed the brake.