0
How come your blinkers don't work but the emergency lights do?
Wiki User
∙ 19y ago
Defective flasher relay.
Wiki User
∙ 19y ago
Add your answer:
Earn +20 pts
I have a 1998 contour my blinker lights and my emergency lights dont work what can be the problem?
Probably Flasher
Who can help me my Blinkers and brake lights out on your 2000 ford explorer sport and cant find owners manual need help?
take it to a mechanic I dont wanna "break lights"
You need to know if there is a relay for the brake and blinkers for a 92 s-10 blazer my blinkers and brake lights dont work?
I am currently having the same problem you are having check the fuse to see if it is blown the blinkers and brake lights are on the same fuse my system has a short in it somewhere and is popping the fuses I am in the process of running new wires since the wonderful people at Chevy ran all the wires thru the frame and you can't access them
Your brake lights dont light up when you pushe the brakes but the blinkers and everything else works on the tailights what is the problem?
Check the 30 amp brake fuse (green) in the engine compartment fuse block.
What is wrong with my blinkers?
They dont work. The bulbs are the most problems. Fix it!
Are there blinkers on test drive unlimited?
For the PS2 version there is not any indicators (blinkers). I dont think there any on there other consoles ether, but there is a horn and headlights.
How do you disengage automatic lights on 1998 Malibu?
i dont believe you can do that, unless you take out the fuse that makes the lights come on automatically
Way your head lights do not work?
Had my headlamps replaced but auto running lights dont come on now..figures it might be a fuse?
How do you permanently disable the daytime running lights on a 2000 Sienna?
Be for starting the van press down on your emergency brake one click then start the van. As long as you dont use the emergency brake your running lights should stay off. To permanently dissable them you could try defeeting that switch
How do you fix the hazards and the blinkers on a 1995 Nissan pickup?
the hazard switch has two sets of contacts. when hazards turned on, blinkers cannot work,even if hazards dont work.for blinkers to work, hazard sw must be in off position-this reconnects blinker circuits to work normally. BUT-the contacts in the hazard sw get dirty and wont reconnect the blinkers to work
You have an 82 f100 the electrical functions are fine with the truck off and the key turned on when you start the truck the blinkers blower motor and reverse lights dont work can anyone help?
replace your wiring hornace that may help, plus check fuse box!
Your signal lights come on but dont blink on my impala?
You either have a bulb burnt out or the turn signal flasher is bad.
