answersLogoWhite

0


Best Answer

Tie wraps can be used to replace a stock radio wiring harness in a 1991 Mercury Tracer. The wires can be replaced with other radio wire from an automotive parts store and the tie wrap can hold them together.

User Avatar

Wiki User

โˆ™ 2014-08-23 00:16:02
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar
Study guides
๐Ÿ““
See all Study Guides
โœ๏ธ
Create a Study Guide

Add your answer:

Earn +20 pts
Q: How could you replace your stock radio wiring harness in your 1991 Mercury Tracer if you had cut it out?
Write your answer...
Submit
Related questions

How do you replace the Vanity visor mirrors for a 93 Mercury Tracer Wagon?

There are five steps on how to replace the vanity visor mirrors in a 1993 Mercury Tracer wagon. Some of the step-by-step instructions are unscrew the visor fasteners and lower the visor, and then make sure to use the pocket screwdriver to unclip the wiring harness from the visor.


How do you replace ignition lock cylinder on a 1996 Mercury Tracer?

Begin by removing the retaining ring at the top of your 1996 Mercury Tracer ignition switch. The ignition lock cylinder will slide out. Remove the wiring harness from the end of the cylinder. Reverse the process to install your new ignition lock cylinder.


How do you change the alternator on a Mercury Tracer?

Remove the belt from your Mercury alternator. Remove the wiring harness from the alternator. Remove the retaining bolts. Reverse the process to install your new alternator.


How do you remove a headlamp on 1998 mercury tracer?

Open the hood to the engine compartment. Remove the headlamp wiring harness. Remove the headlamp assembly retaining bolts. The headlamp will come out.


Why don't the headlight doors operate on my 1967 Mercury Cougar?

It is possible that the headlight door wiring is degraded to the point of not working. After nearly 50 years, it could be time to replace the wiring harness.


How do you replace a wiring harness on a Dodge Ram?

The wiring harness can be removed by unplugging all of the wires. The wiring harness is also held in place by several retaining screws. Remove the retaining screws.


How do you replace the alternator on a 1989 Mercury Cougar?

You can replace the alternator on your 1989 Mercury Cougar by removing the alternator belt. Disconnect the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.


1993 Mercury Tracer speaker wiring diagram?

NEED COLOR CODE FOR RADIO SPEAKER WIRE 93 MERCURY


How do you replace the wiring harness on a 1995 Pontiac Grand Am?

You should never have to replace the wiring harness, and if you do get a professional to do it. Now if you are talking about the wiring harness for a after market head unit, then you just buy an adapter. AND ALWAYS DISCONNECT THE NEGATIVE BATTERY CABLE WHEN MESSING WITH YOUR CARS ELECTRICAL SYSTEM.


How do you replace the wiring harness on a 1961 MG?

Hey David==Get a new wiring harness from someplac like PAINLESSWIRING.COM and it should have instructions. GoodluckJoe


How do you replace the alternator on a 1995 Mercury Villager?

Remove the wiring harness from your 1995 Mercury Villager alternator. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install your new alternator.


How do you install an AC compressor on a 1997 Mercury Villager?

bolts the compresor to mounted bracket, conect the refrigerant lines on compresor,conect the clutch wiring harness replace the drivebelt.


How do you replace the flasher relay on a 2000 jeep wrangler?

Follow the wiring harness from your blinker. Disconnect the factory harness from the relay. Replace with the new relay.


Where is wire for brakes on 2002 mercury villager to attach to trailer brakes?

You need to buy an adapter harness. Do not cut into your wiring harness.


How do you replace ignition coil on 1999 Mercury Grand Marquis?

Remove the wiring harness from your 1999 Mercury Grand Marquis ignition coil. Remove the ignition coil retaining screws. Reverse the process to install your new ignition coil.


How do you replace the rear speaker on a 99 Mercury Cougar?

Remove the rear speaker cover from your 1999 Mercury Cougar speaker. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the speaker. Reverse the process to install the new speaker.


How do you replace door speakers for a 1997 Mercury Mountaineer?

Remove the speaker covers from your 1997 Mercury. Remove the door speaker retaining screws. Remove the door speaker wiring harness. Reverse the process to install your new door speakers.


How do you replace the wiring harness on a 1988 Jeep Cherokee Laredo?

It really depends on which wiring harness. If you are asking about the whole cars wiring I would seriously take it to a shop. Other harnesses may be easy, like the radio harness, and door switch harnesses are the easy ones.


Where is the wiring harness connector located on a Mercury Sable 2003?

Should be firewall area by booster.


How do you replace the VSS on a 93 Honda Del Sol and where is it located?

The VSS is located on the top of the transmission and is connected to the engine wiring harness. To replace it all you need to do is unplug the old one from the wiring harness and unscrew it from the transmission, instalation is the reverse of removal.


Can you replace a 1994 eclipse 1.8L engine with a 2L turbo 1994?

yes, but you have to change the wiring harness to accept the engine, but yes, it can be done. If you do not have the right wiring harness, you would burn up the turbo


How do you replace a brake light swith on a 1995 LeBaron?

Its located on the brake pedal. Unplug the wiring harness and unbolt it and replace it.


How do you fix a burnt out 1991 Mercury Cougar headlight?

If the lightbulb itself is burnt out on a 1991 Mercury Cougar then just replace the light. If it is the wiring that is the problem then find the burnt wires and cut them. Replace them with new wiring.


How do you replace the complete wiring harness in a 1994 Chevy beretta?

Bstuff.com should have the info you are looking for.


What are the wiring codes for the stereo in a 97 Mercury Mountaineer?

Standard 2 Piece Harness Up To Late 1990