The front wheels bearings are sealed in an assembly. You cannot replace the bearings, just the entire assembly. I priced out the units about 5 years ago and I was quoted anywhere from $150 to $225 each. I asked the parts suppliers if replacing them is a DIY job and most advised against trying it myself.
yes
The 1996 Pontiac Grand Am is a front wheel drive application. This vehicle has sealed (non-serviceable) and bolt-in wheel/hub bearing units. Removing and replacing them involves removing the wheels/tires, brake rotors and then unbolting the wheel/hub bearings. The General Motors OE front hubs are AC Delco #2025K.
change front coil spring on 2000 Pontiac grand am
what tools do i use to change the front brakes in my 2003 Pontiac grand prix
pictures of how to change front signal bulbs on a 2004 grand prix pontiac
Grand Ams eat wheel bearings, if one is bad you might as well replace both of them as the other will go out in a month or so, I had a 94 and replaced 6 wheel bearings in that car in 113,000 miles.
How do you do a front-end alignment on a 1994 pontiac grand prix?
sorry i cant answer that ? but just curious I have a 2003 Pontiac grand am se and the front brakes have to be replaced about every 7 months, are you haviing any problem like that with your car?
The front speakers on a 2000 Pontiac Grand Am are 4x6. The rear speakers on a Pontiac Grand Am are 6x9.
no their not front wheel drive you must be thinking of a Pontiac grand am or a grand prix
Need to change the whole bearing...
First, check the lug nuts. If that's not it, check the wheel bearings.