I bought mine at one of the local large retailers. They run about $10-$20. The radio in the vehicle needs to be designed for it with an 'auxilary' jack in it.
The other option is a device that looks like a cassette tape that plugs into the iPod and slides into the tape player.
If your are using a wire kit, you need to connect the blue and/or blue/white wire from the harness to the blue/white wire from your radio. Now if you have cut your wires you will have to locate the one wire that will turn on your factory amp.Good Luck!!!!
That depends. There should be two red power wires on the back of an aftermarket deck. One will be 'constant' power, the other will be 'switched' power. The 'constant' one always has power, so that radio stations and other settings aren't erased when the vehicle is turned off. I'm assuming you're not using an adapter harness to connect the aftermarket deck directly to the GM radio harness.(always the preferable option) Most of the time(when not using an adapter harness) I will locate a pre-existing wire in the dash that is 'constant', and tap into that for the 'constant'. The 'switched' power can be connected to the factory radio's 'switched' power source. You'll have to figure out which wire that is in the GM harness and connect to that, or (not so ideally) cut that wire and connect it to the deck.
If you are unsure of the remote wire, locate your radio fuse and get a fuse connector. hook it into the fuse and run it wherever you need it. all the remote does is swith the equipment on and off.
1. music played in a factory 2. music made in a factory 3. music that makes you want to over work yourself in a factory
you have to get an amp, crossover or an amp with a crossover built in and all the gear to install it like speaker wire power cable patch cords remote wire bow for the subwoofer that will fit the truck
Maybe your speakers aren't conected
a factory
The web address of the Crayola Factory Discovery Center is: http://www.canals.org
The phone number of the Crayola Factory Discovery Center is: 610-559-6613.
The address of the Crayola Factory Discovery Center is: 30 Centre Sq, Easton, PA 18042
15 inch factory
What part is required to connect a mono amp to a factory stereo
More information about factory automation can be found directly on the Factory Automation website. Even more information can be found on the Wikipedia page for Factory Automation.
Profiderall is avaialbe directly through their website.
On a 1997 Dodge Dakota, the factory amplifier is located in the passenger side kick panel, directly in front of the door. The amplifier should be hooked directly into the speakers.
These have been refurbished and tested by JL Audio directly with factory specifications. 100% JL Audio parts
Buy directly from the factory once you find a model you like, the factory ends up doing the support after the sale anyway.