The propeller size is determined by the engines wide open throttle RPM
Let take an example of an18' boat with a 125 hp engine with a rpm range of 4500-5500. In most cases you purchase a boat with some sort of propeller on it. Let's say this motor has a 21 pitch prop on it and at wide open throttle under a normal boat load, the engine turns 4900 rpms. Well it's in the range so it's the correct prop, right? Well yes and no. For the health and longevity of the engine it's okay, but for overall performance, you want to run a propeller near the top of the range. An 1" of pitch in a prop can change the RPM 200-400. If you need more RPM decrease the pitch and vice versa for less. Remember this is a trial and error and not an exact science. Factors like loading the boat, fuel and water all have to be considered.
your block is cracked
As long as the engine does not exceed the vessels maximum horsepower rating, it should be fine. The age of the motor, other than the condition of it, would not be a factor. The engine shaft length on the 115 is standard 20 in.
app weight of a 24 foot bennington pontoon boat with a 60 horse 4 stroke mercury
Yes. A motor doesn't guarantee that a boat cannot sink.
4,500
a 75 hp merc goes 19 mph
I have a 115 Mercury inline 6...quite a heavy motor on my Godfrey 24' pontoon boat and it holds it just fine. I've seen forums where people have 150 hp motors on 24' boats and they are OK as well.
around 95-97mph, if its a day when alot of water is out,,, if a foul, less watery day, then only around 90mph
Crest pontoon was created in 1957.
Crest pontoon's population is 60.
a pontoon is made out of stingy plastic and they suck
They are modular floating Pontoon systems.