Best Answer

Yes, power = voltage x current = 54 x 110 = 5940 watts. But the odd thing is the rated horsepower. I was taught that one horsepower = 746 watts, so 135 hp = 100,000 watts. Are you certain that the pump is rated at 136 horsepower? Or can anyone else address the discrepency? W=volts X amps; therefore W= (110)(54)

🙏

🤨

😮

Study guides

Q: How do you figure the watts of a 110 volt pump that is 135 hp and has an amp draw of 54?

Write your answer...

Submit

Related questions

The formula you are looking for is I = W/E. Amps = Watts/Volt.

Voltage of the pump (12) multiplied by the current draw = the watts used. This would be 12 watts if the current was 1 amp, 24 watts if the current is 2 amps, and 36 watts if the current is 3 amps, and so on...

Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts

Your question answers itself... 1000 watts, when operated on a 480-volt source..

Divide the power rating (in watts) by the voltage (in volts). So if you use a 100 watt light bulb in a typical 110 volt lamp then it will draw 100/110 = .91 amps of current. Or plug a 1500 watt electric heater into a 110 volt wall socket and it will draw 1500/110 = 13.6 amps of current.

Watts is the amount of power the heater has and amps would be the draw- if it is a 120 volt heater than the amps would be 12.5 amps and it is instantaneous

Watts = volt x amps x 1.73

Watts = Amp x Volt Find out what Voltage you're using and then do some simple math to figure it out: Amp = Watt/Volt

Answer Generators usually always go by watts. To figure this all you do is take(volts x Amps) = watts. You know the volts (220) then look on the pump for the amp rating and then multiply them and you will have your watts. Then get a generator that is rated for this amount for continuos operation not peak watts. Hope this helps.

There are zero watts in a volt. To obtain watts a current is needed. W = A x V.

They will use the same amount of power. A 100 watt bulb will use 100 watts. If a bulb is rated at 100 watts and is specified as a 120 volt bulb, if you apply the 120 volts, it will draw 0.83 amps. Volts times amps equals watts. If you have a bulb rated at 100 watts and is specified as 12 volts, if you apply the 12 volts, it will draw 8.3 amps.

110 volts divided by 1,300 watts(1.3 kw) = .09 kw or 900 watts.

10 watts.

On average most normal size vacuums draw 10 amps which comes to 1200 watts on a standard 120 volt vacuum.

No one pump, so one answer. Some are 120v, some are 240 volt. A 1.5 hp pump is around 1100 to 1200 watts.

The formula you are looking for is I = W/E. Amps = Watts/Volts.

Remember that watts are voltage x current(amps) The number of watts you can get from a 48V battery will depend on how many amps the battery can deliver and how much the load can draw.

Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.

No, if you check the amperage of the 120 volt unit it will draw twice as much as the 240 volt one. Your power bill is based on watts. W = Amps x volts. Say the 240 volt A/C draws 6 amps, 6 x 240 = 1440 watts. Now the 120 volt A/C draws 12 amps, 12 x 120 = 1440 watts.

On a 120 volt supply, up to 360 watts. On a 240 volt supply, up to 720 watts.

It is expressed in Volt-Amperes not Watts.

VA is Volt Amps or Watts.

It depends upon the voltage the current is at. The higher the voltage, the lower the number of amps needed to deliver the same amount of power. For a 110 volt AC circuit, 230 watts means a draw of of about 2.3 amps. A draw of 15 amps at the same voltage will produce about 1500 watts.

One volt is zero watts.

Not sure about how many Watts your 36 volt charger uses, but you can find out by this formula... Volts X Amps = Watts.