Removing Front & Rear Rotors
I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT.
I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off...
The way I removed the Front & Rear Rotors was ...
1. I put lots of PB Blaster in the back and the front of the rotors to be removed.
2. I put plenty of tension with the 3 Jaw Puller...
3. I hit the back of the rotor with the sledge hammer while rotating rotor...
And it came right off...
Hope this helps...
a large hammer
I just replaced mine, rotors had rusted away. Remove caliber, mine were rusted to the wheel hub, had to pry off. cleaned old rust off with steel wool, new rotors slid on with no problem
How do you remove the rotors on a 1992 ford aerostar?"
First remove the wheels,then the calipers and hang the calipers with a coat hanger {dont let thenm hang by the hose. Then remove the rotors. That easy,.
Remove the rotors and take them to a machine shop for inspection. If there is not much damage they can be turned.
$175.00
Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotors Rotors should slide off hub
Should be of the "peel off" type. Remove wheels Remove caliper mounting bolts Slide caliper off rotors and support Disc should slide off wheel studs
remove the brake caliper and the rotors come right off
Remove wheels Remove calioper mounting bolts Slide caliper off rotor Rotors will peel off hub
How do you remove the brake light cover on a ford focus
"http://wiki.answers.com/Q/How_do_you_remove_Front_Rotors_on_a_1994_ford_ranger"