There are some units that replace the oil dipstick
There are some units that require removing a freeplug and replacing with blockheater
Where is the heater core located on a 2004 Hyundai eleantra
Its going to be under the dash beside the gas pedal
The heater inlet hose on a Hyundai Accent is in the back of the engine compartment. It goes through the firewall to the heater core.
An engine block heater for a 2004 Hyundai Tiburon is a part of the engine that helps keep the engine warm when it is very cold outside. It has a plug that needs to be plugged into an electric outlet when the car has to sit in the cold weather.
When facing the car with the hood open, the block heater cord is stored in the front right corner just behind the headlight. It has plenty of cord available also.
The heater blower in a 2001 Hyundai XG300 is located on the passenger side of the engine. The blower resistor will be located on the firewall.
The 2001 Hyundai Santa Fe does not have a factory block heater option. Beginning in 2009 there is a port to install a Hyundai manufactured block heater for cars built for sale in Canada. Pre-2009 requires a heater to go in a freeze-plug hole, so the cord is wherever the installer put it, usually behind grille.
check your coolant level. most times its from a coolant leak in the system.pressurize the cooling system to find the leak.
Take it to a mechanic.
Do you have a block heater on your SUV??? Find an elecrical cord and plug that is usually tywrapped near the the front grill!!
its happen because heater core have too much durt insaide and you can clean it with some blowing thing or replace
To normally install a block heater you must remove an expanstion/ freeze plug in tighten in the block heater. The 6 cylinder 4.2L engine unfortunately does not appear to have any such plugs. The V8 engine should have a screw in style block heater installed in the left front of the engine block just below the cylinder head.