How do i use a splitter to hook up to a neighbors cable tv service?

A monitor splitter cable is used to hook two monitors up to one computer. The splitter divides the signal from your computer into two parts that each monitor can display.

get a cable splitter and some extra coaxial wire/ the splitter has a single cable connection on one end and 2 at the othet. They are cheap. The wire is a little more costly.

An HDMI splitter is used to hook up two different cable cords to one outlet. Make sure the cable cord is long enough to make sure it can reach everything it is hooked up to.

Yes. You just have to hook the machines to your television. No cable service is required.

Go to a place like Best Buy, and get a splitter. You could try using a splitter.

Yes, hook it up just like a desktop.

SEVERAL FACTORS. IF YOU ONLY HAVE 1 RECIEVER, PLUG LINE FROM WALL INTO THE INPUT ON YOUR RECIEVER. THEN, HOOK A CABLE WIRE FROM OUTPUT TO A SPLITTER & RUN A CABLE FROM EACH SIDE OF THE SPLITTER TO EACH RESPECTIVE TV. IT IS IMPORTANT TO KNOW THAT BOTH TV'S WILL HAVE TO WATCH THE SAME THING AS THERE IS ONLY ONE RECIEVER FEEDING BOTH TV'S.

Sounds like you hooked the 3-way splitter to the RF out coax jack on the cable box, which only puts out rf on channel 3 and only what the box is tuned to in regards to programming. Hook up the line from outside to the input of the splitter, each output of the splitter to each cable box/tv input.

You need internet service from DSL or cable

no it is impossible to hook up cable to the projector, the only way is not hook a asr cable to the DVD out box and the take rst cable from the out cable hook into the in port on the projector in conclustion you need a DVD player also

The connect more than 2 TVs to a receiver, you need to splitter to split the signal for the TV to take to another TV. You can get a splitter at Radio Shack. The cable should be a RG6 coax cable. If you want to split TV 1 with anything other than a coax cable you need to get a special splitter for the type cable you are using from the receiver to the TV; RCA, component, or HDMI. HDMI does have a length limitation. When you mirror 2 TVs, the same program is on both TVs; when you change channels it will change both TVs channels.

Even though you have digital cable you will not be able to hook up your cable modem to it and get internet services without having purchased that service. The company has to set it up in a specific way and turn on that specific service in order for you to use it.

You can route other things such as your cable through the DVD player, or you can buy a splitter, whichs connects more than one object on one side and the other side plugs into your TV.

A company that will hook you up to the internet. They can provide internet through Dial-up, DSL, or Cable

You don't you need an internet service like cable or DSL

The device is called a coaxial cable.

I assume you have cable boxes on all the other tv's? And you just want to add one with out having to pay for another box from the cable co? Well you can by putting a splitter on the TV nearest to where the new one you one to hook up is and run the wire to it. And there you go. You can get splitter and the cables in the dollar stores now. I warning ... Most cable comp. such as mine, If you don't have the box on it my channels won't go past channel 100.. Which defeats my purpose as all the shows my kids watch are above channel 100... So that is how they get you to pay for the box or just go ahead and deal with only up to channel 100. I have Comcast so I do not know how far up other companys will let you go up to with the splitter and no box.. Hope that helps you!

If you already have a cable or DSL internet service provider (ISP) and a modem you will need to purchase a router and an ethernet cable. The cable runs from the router to the PS2 and provides access to the internet once connected

Use a Y-splitter to split the video connection.

You cannot hook up a hard drive directly to a cable box.

You can watch cable tv by purchasing a router from your cable company or local store. You hook the cable up to your tv and then you hook it up to your laptop.

how do you hook up wireless internet service

If you have a solo receiver, you need a splitter to split the signal from the receiver to the 2 TVs. If you have a dual receiver, you need a coax cable coming off the TV 2 port going to the 2nd TV.

if you have a really new computer it will probably have a HDMI (high definition) if you have a laptop there will probably be a projector plug heres what you need below an RGB to RCA Or RGB to s- video cord NOTE: you can buy these at Future Shop a RGB video splitter NOTE: you dont need this if you have a laptop A TV If you have one of those new LCD Plasma most have and RGB/PC plug on the back plug cable into splitter if you have a laptop skip to step 2 plug cable into tv ( you will be able to hook it in to the side or back of laptop) CONGRATULATIONS YOU HAVE HOOKED YOUR TV UP TO YOUR PC

To hook up a solenoid switch, the battery cable and the cable that goes to the starter have to be properly connected. The wire from the alternator goes to the battery cable side.