In order to check the Transmission Fluid on a 2000 BMW 323i, you must first determine whether the transmission is manual or automatic. If it's automatic, it's not suggested that you change it yourself. If it's manual, you should look in the user's manual for instructions.
How to check transmission fluid on 2000 bmw 323i
is the brake fluid
2800$$
The power steering fluid is ATF fluid on BMWs and you can check it from the cap in front of the engine that says ATF fluid only. Take the cap off and on the bottom of the cap you will see a stick, check it there.
BMW uses there own special fluid and you have to contact a dealership to get it.
becoz they have three transmissions..
The vehicle speed sensor will be located above the transmission output shaft.
What is the lug pattern for a 2000 BMW 323i?
it's located at the bottom of the car, u have to get underneath to see it.
you must have the car on a lift or jack stands and level as you will need to be under the car with the engine running. Take off the transmission bolt that is on the side of the pan.The fluid should be to the at the bottom of the hole. Fill with the proper fluid till it starts to flow out. The engine must be running when you check or fill as the fluid will come out after taking the bolt off without the engine on. You will have to fill through the same hole.
On the motor
What kind of freon for bmw 323i 2001
You need to scan the codes. Check with Autozoen for FREE scan.