There is a screw adjustment in the vacuum modulator port
The transmission modulator valve, On your 2006 Chevrolet Monte Carlo, is located on the top of the transmission. The valve should be labeled as such.
The vacuum modulator is on the front of the transmission. The modulator is a round valve and should have a steel line running from the top of the engine(next to the throttle body) down to the valve.
The 1999 Monte Carlo has a 4T65E transmission that has no vacuum modulator, This transmission uses an EPC solenoid to control pressure, and commonly goes bad causing a harsh 1-2 upshift, pump whine and a check engine light with code P1811, max adapt.
yup
ya if they are the same size motor
In the transmission.
how much automatic transmission fluid does a 2004 monte carlo ss take on a full flush
No, the transmission from a 1982 Monte Carlo will not fit in a 1991 Cadillac. A transmission can be purchased from a salvage yard, transmission shop, or even from an auto parts store.
there is a set screw on the linkage on the carb that will adjust it.
yes as long as it is the same type of car for example, 95 z34 transmission will fit a 97 z34
All 2002 Monte Carlos, with 3.4L or 3.8L, have the 4T65E transmission.
It is located on the transmission.