figured it out. thanks anyways.
If you see bleeder valves on the cooling system use them to bleed the system. Otherwise, remove the radiator cap, turn the heater control to hot, start the engine, keep the coolant topped off, and watch until no more air bubbles are escaping.
turn steering wheel lock to lock several times.
the best way to "bleed" any clutch is to get a can with a pump and a hose that will fit over the bleed screw. Loosen the bleed screw put the hose over it and pump fluid back up to the master cylinder this will force any air out.
Yes, This is part of hydraulic system
It's not easy
turn the steering wheel lock to lock several times it bleeds itself when it is running
cut up the sable and make it run
It doesn't have a bleed valve for the power steering.
bleed pattern for toyota hiace 5th edition
You don't bleed power steering fluid. Raise the front of the car, start the engine, turn the steering wheel lock-to-lock 3 times to get the air out of the system. Make sure to use axle stands and block the wheels so you can do this safely.
look in how to bleed air off cooling system