0
if there is no bleedr(looks like a greese insert) in the vicinity of the water pump, u need to get engine to running temp to open thermostat.then carefully remove radiator cap.the carefully squeeze top radiator hose a few times this will sort of push air out.this generally works. now to avoid air getting in system in the future do not add coolant thru radiator cap. add thru the overflow tank
Wiki User
∙ 16y ago
Wiki User
∙ 14y agoShould be a bleeder valve on the thermostat housing, or close to it. Fill coolant, open bleeder slightly, and run until steady stream of coolant comes from bleeder.
Note: You should connect a clear tube to the bleeder to direct coolant into a suitable container (like the overflow reservior) to prevent a mess.
Add your answer:
Earn +20 pts
Purpose for why root beer makes you burp the most?
Its carbonated
Will heartburn make you burp?
It depends on the person. It makes me feel like i'm going to throwup.
Baby items that start with letter b?
please tell me all household items beginning with the letter A
Any good apps for smartphones?
I know scoops, burp free, ebuddy, falldown ,doodle buddy,toki tori lite, angry talking bird ,imikimi and lots of others I just can't remember them!!!!
How do you replace a thermostat on a 1994 Mercury Tracer?
Follow the top radiator hose back to the engine. There is where the t-stat housing is. Remove the hose, remove the housing, remove the old t-stat, clean gasket surfaces install the t-stat into the housing with the spring side sticking out toward the engine, use spray adhesive to attach the gasket(DO NOT USE RTV), reinstall everything and be careful to evenly tighten the housing bolts until they are snug(DO NOT RAUNCH HARD ON THE BOLTS). Fill the cooling system with a 50/50 mix of coolant and water, and burp the system.
How do you burp a Saturn cooling system?
If this is for an S-Series, you don't have to, The system has a deairiation line and does it on its own.
Why Subaru Outback runs hot after replacing thermostat and water pump?
You need to burp the radiator and cooling system.
How do you bleed or burp air from engine cooling system on 2002 Oldsmobile silhouette?
It should have a bleeder screw on top of the thermostat housing.
How do you burp the cooling system on a 2001 eclipse gt?
The cooling system on a 2001 Mitsubishi Eclipse GT can be burped by gently squeezing the upper radiator hose. Keep topping the overflow tank until the air is purged.
1992 legend still over heats after changing the radiatorradiator fan sensor radiator capthemostat and flush the cooling system?
burp the water system that may help
How do you burp cooling system on 2000 Chevrolet Silverado?
Locate the plug on the bottom of the radiator to drain it. Put some radiator cleaner in and drain it again.
How do you bleed or burp the cooling system in a mercury tracer?
You carefully remove the top coolant hose to the heater, not totally off, just enough so air can get out.
How do you burp the cooling system of a 1990 Chevy truck?
Remove coolant cap, allow engine to get to operating temperature, turn on heater full blast and patiently wait for air to escape system.
How do you get air pockets out of cooling system for 2003 Chevy Venture?
pop the radiater cap off and let the van engine run for 30 minutes. this will burp out any air in the cooling system and your engine will not overheat then. afterwards, fill the radiater back up as needed.
Why does your 97 Avalon overheat new water pump new radiator new thermostat after 3 or 4 days it overheats when ac is on?
you need to burp the cooling system
How do you replace heater core on a 1998 f150 v8?
There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system. There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system.
How do you change a heater core on a 1998 Ford F150?
There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system.
