Just ground the wire.
I have a clarion unit and what i did was run the green brake wire to chassis ground, tap in a toggle switch by cutting the green wire & wiring the green wire to the toggle switch. When the clarion unit is on all you have to do is turn the switch off then on, and that will bypass the brake switch allowing to watch video moving or sitting. Mine works perfect.
Ground the green wire on the harness.
The parking brake interlock on video players in cars is an important safety feature and should not be disabled.
Kenwoods are very simple to bypass for the parking brake. Just take the parking brake wire which is usually green and ground it. That's it!
Its very simple to bypass the parking brake on Kenwoods. All the parking brake wire is is a ground wire. So, all you need to do is take the parking brake wire and either ground it or join it to the ground wire on the harness by soldering or whatever you wanna do.
Pull the E-Brake up one click and the lights should turn off.
phase linear uv8020 bypass code for parking brake without remote?
There should be a wire that should be grounded into the E-brake wiring. Ground that wire and it will think the E-Brake is on. You can also update The NavMate software. go to HorizonNav Dot Com web site. Free Nav software update and 2010 maps. The new maps have Text to Speech and 11 million POI's
So far (Nov. 2009) Dual has not released the permanent code for the 9101. The only thing you can do right now it the e-brake or a toggle switch. Happy motoring.
CFG8993HJJX.
just ground the parking brake wire
no