It depends on the Make and Model of the car, truck, van, ext... but in the easiest way lossen the long bolt ont the alternator to get the belt lose, then take the old belt off, put the new belt on, and retighten the bolt... but like I said depends on the Make and Model as my 95 Mazda Protege has another belt the has to be taken off first and I'm still trying to get help with that...
how do you change 2004 kia sorento alternator belt
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
You have to remove the power steering belt and the AC belt to remove the alternator belt.
Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.
can you change the alternator belt in a 1998 Chevy metro from under the car.
To change the alternator belt an a 1985 Chevy Celebrity: 1. Loosen the adjuster bolt and the mounting bolt. 2. Move the alternator to release the belt tension and remove the belt. Reverse to reinstall a new belt.
To change the alternator drive belt on a Bobcat 853 you start by lifting the cab. With the cab up, you can see the back of the engine and alternator. Locate the belts spring tensioner and release the belt.
You can change the alternator belt, on your 1994 General Motors vehicle, by loosening the tensioner pulley. The loosened the tensioner pulley will create slack in the belt. Remove the belt and replace with a new belt.
You can remove your 1993 Mitsubishi alternator belt by loosening the tensioner pulley. Slide the tensioner pulley to the right. The alternator belt will become loose and can be removed. Reverse the process to put the new alternator belt on.
when do you change cam belt and when do you change timing change
See instruction on http://www.mgfcar.de/alternator/belt_tension_MGF.htm
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
the alternator belt is the one all the way in the back. You have to loosen the power steering pump, A/C idler pulley, and then loosen the alternator.
What belt? Drive belt is easy, just loose the 3 bolts on the alternator, pry the alternator forward, put the new belt on, pry the alternator back, and tighten the bolts. Power steering belt is much more difficult.
theres 2 bolts on the alternator 1 of them is to loosen the belt of and the other is to remove the alternator all together i hope that's a helpful answer to your question
Disconnect the battery. Loosen the alternator bolts and slide the alternator to loosen the belt. Remove any other belts in front of the bad belt if necessary to get to it. Remove the alternator belt, and install the new one. Pull the alternator to the side to tighten the new belt snug and hold while tightening the bolts. Reconnect the battery
locate the alternator take off the belt put new one on then the belt and your done
on the alternator on top is a bolt losen that bolt and it will allow you to move alternator causing belt to losin
You need to remove the serpentine belt and unbolt the old alternator. Bolt on the new one and reinstall the belt. Its that easy.
alternator drive belt?
Remove the belt by using a 3/8 ratchet in the belt tensioner below the alternator. Insert the ratchet into the tensioner and push to loosen the belt. When the belt is loose, remove it from the alternator. Remove the electrical connections from the alternator. Then remove the 3 mounting bolts. The alternator should now be diaconnected from the engine. Installation is the reverse.
What bolts to loosen to put alernator belt on and how to put it on when a/c belt is on.
i need to change my alternator belt and don't know where the tension wheel is so i can take off the other belt to replace the alternator belt on my 94 Mazda protege 1.6l
To change the alternator in a 1985 Chevy Celebrity; 1. Disconnect the battery ground. Use protective gloves. 2. Loosen the belt adjuster bolt and the main mounting bolt. Move the alternator to loosen the drive belt, then remove the drive belt from the alternator pulley. 3. Disconnect the wires from the alternator. 4. Remove the bolts and lift the alternator from its mount. Reverse the instructions to reinstall the alternator.