Access the Fog Lamp from the top. Remove the cover between grill area and the radiator by using needle nose priers and prying up plastic clips (can be reused). Once cover is removed, you can see the back of the lamp covered by a rubber boot held on by a zip tie. Cut the zip tie and pull the rubber boot back to expose the lamp. Unclip the lamp out from the plastic and disconnect wire and replace lamp. You can use a little wd-40 to get the rubber boot to slide back on and you will need a new zip tie.
To change the license plate lamp on a 1998 Bravada, locate the bulb. Visit an auto parts store to obtain the exact bulb and screw it in place.
reach behind it turn the back of the bulb socket counter clockwise
You have to stick your hand behind the headlight. And there is a piece of plastic on the back side if the lamp. Twist it to the driver side fender and it out and you will see the light bulb.
You can change a bulb in the multi function display unit of a 307 by first making sure that the lamp is turned off. Then unscrew the bulb and remove it from the lamp.
It is a double ended halogen bulb and I do not know how to get to it to release it from the lamp.
Which brake lamp are you needing to change? Brake/turn signal lamp.
depending on the bulb. alot of heat
Get a flat head screwdriver and pop it off...then replace the bulb
On the passenger side there is a large black fuse box cover that has to be removed and then you reach thru the small hole to the lamp... might be easier to unplug in place and then twist it. Driver Side - remove the air filter assembly to reach the lamp.
1996 Oldsmobile headlight bulb lamp replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Open hood panel and prop with rod. Remove screw at headlamp that holds signal lamp. pull lamp straight forward. remove and replace bulb
how to replace standing lamp in 1998 e320