How do you change a fuel filter on a 1994 ford ranger?
Look under the drivers seat on the inside of the frame rail.
Remove the clips and replace. The clip on the motor side of the
filter (as opposed to the pump side) will need a quick disconnect
release tool. You can find these at your local auto parts store.
Put the tool on the output side of the filter, and push the tool
toward the line, then, just pull the line off! Make sure you remove
the filter housing piece or you will find the filter won't come
out. There are two bolts directly under the frame rail holding the
housing in place. Mine need a 13mm wrench to take the bolts off.
This may or may not be necessary as some fuel filters are just held
in by a clamp.