how to changr pick up coil 88 vandura
Remove Distributor,remove drive gear,remove shaft,remove pickup coil.
you must remove the distributor, disassemble unit and replace pick up coil
All pick-up trucks come from the manufacturer with engines.
96 gmc does not have a pick up coil but the coil is monted to the intake removed by two bolts pick up is in the dis. removed by pulling the dis. then by taking a part
1982 318 pick up coil gap
its not exactly a normal pickup but it is under the left side cover
check the pick up coil on the left side cover of the engine they have a stator and a little box that's the pickup coil check if its damage or the ignition coil
it could be in the pickup coil .ive had this problem even if the plugs are fireing the pickup coil controls the fuel injectors also
Often a pickup coil is mounted inside a distributor to detect the position of magnets on a star wheel. The hall effect switch can be part of the pickup coil or a separate solid state device immediately adjacent.
if the coil is on the distributor cap,remove cover then disconnect wires from the coil and remove coil. if coil is on engine then loosen the bolt and remove from coil mount
remove the distributor cap remove the screws that attach the pick coil to the base of the distributor and replace in reverse order
Usually, NO.