The transmission would have to be removed, which is a really big job
Dodge, Chrysler, Plymouth no.
on both cogs on cam and crank there will be a stamped dot. you need to align these with each other during installation
Have you checked for spark after you replaced the pack? if not i would check the crank sensor. ANSWER I would check to see if you have fuel pressure before I would check the crank sensor which I think would throw a code. Spray a little throttle body cleaner into the engine and then crank it. Does it start? IF so you have a fuel problem and it is NOT SPARK. Just turn the key on and go back to see if you hear the fuel pump running. I just wonder why you are looking for spark unless you did some tests for it.
the ignition control module is getting hot and shutting down take it off and have it tested at any auto parts store its free to test
IF IT has a pick-up in the Distributor.IF not t could B a Crank sensor.
how do you change a timing belt on a 1998 Plymouth breeze 2.0 liter engine
yes
yesyes
On a 1998 Plymouth Breeze : Both the 2.0 and the 2.4 liter four cylinder engines have a timing BELT
( Yes ) according to the Gates website ( they make timing belts etcetera ) the ( 2.0 liter ) four cylinder engine in a 1999 Plymouth Breeze IS AN INTERFERENCE ENGINE
5 quarts
YesYes
Not without heavy modification. The '97s only had the 2.0 liter SOHC engine (same as most Neon's).
The idle speed is computer controlled and is not adjustable.
The crank position sensor on a 1993-1997 intrepid with the 3.5 liter is located on the passenger side of the transmission bell housing ( top ) breeze to change and usally fixes the cold starting issue with these automobiles ( usally ) for $40 or less it is worth a try!!!!!
where is the timing mark for Plymouth acclaim 1994 2.5 liter?
Pull the balancer then the seal. NOT EASY