Be sure to read out the wires going to the motor. The motor may not be bad, unless the signs are obvious like grinding. A banging in the door isn't necessarily a bad motor, just the glass coming loose from the rail or a rail arm out of the rail slide or a bolt has fallen out. Troubleshoot the problem with the panel off before you replace parts.
Remove the door panel. There are screws in the arm rest. Tape the glass to keep it in the up position and in place. Disconnect the electrical input. Drill out the rivets holding the motor to the door plate. Make sure you have fasteners and a means to install them. disconnect the rail from the motor input shaft. remove the motor. Installation is opposite the removal.
IT IS MOUNTED BY RIVETS. YOU MUST DRILL THEM OUT
The maximum motor power of the Chevrolet Astro differs due to the fact that there are several different types of this car. Looking at the 1995 version, however, one can determine that the maximum motor power of the Chevrolet Astro is 195 hp at 4,000 rpm.
To change the heater blower motor on a 2000 Chevrolet Astro Van open your hood. After you open the hood you will see the heater box on he passenger side remove the four bolts holding the motor in and pull it out.
Remove the inside door panel of your 1994 Chevrolet Corsica. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
you need to remove the window motor then you can just move it by hand,my 92 astro van is the same way
Is it bolted or riveted . Drill out the rivets and use bolt on the new motor.
The Chevrolet Astro was discontinued in 2005, along with the GMC Safari, getting replaced by the Chevrolet Express and GMC Savanna. The Asro and Safari were having troble with gasoline and their motor, so they decided to discontinue them and replace them with the Express and Savanna.
you have to drill out the rivets
I need instructions on how to change the window motor in 1995 Chevy Camaro.
You will need to remove the inside door panel of your Chevrolet El Camino. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new power window motor.
to remove the window motor you have to drill out the rivets and replace them with a standard screw and nut and making sure that the screw is not to long.
how to replace window motor ion 91 madza miata