To change the alternator belt on a 1998 Mazda 626 you need to first loosen the bolt that is located in the center of the adjustment pulley. Next, turn the adjustment bolt to the left until the belt is loose and can be removed. Reverse the steps to replace with the new belt.
can you change the alternator belt in a 1998 Chevy metro from under the car.
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
i need to change my alternator belt and don't know where the tension wheel is so i can take off the other belt to replace the alternator belt on my 94 Mazda protege 1.6l
What bolts to loosen to put alernator belt on and how to put it on when a/c belt is on.
on the alternator on top is a bolt losen that bolt and it will allow you to move alternator causing belt to losin
how do u replace alternator belt on 2002 mazda protege 5 stationwagon
This year Mazda protege does not have a serpentine belt. It has two belts, one for the alternator/water pump, and the other for the power steering and a/c.
Remove the power steering belt first then the alternator belt will go on.
Loosen tentioner, remove belt replace retighten.
You remove no pulleys. Just loosen the belt and then remove the alternator.
you have to loosen the top alternator bolt alowing the alternator to swing forward loosening the belt
The alternator belt on a 1998 Dodge Neon is adjusted by loosening the retaining bolts and applying pressure to the side of the alternator with a pry bar. With the belt tight, the alternator can then be bolted down.
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
when do i change a cam belt on a mazda 2
how do you change 2004 kia sorento alternator belt
Disconnect the battery Remove the engine covers to access the alternator drive belts. Remove the electrical connections from the alternator. Slacken the bolts, remove the belt. Remove bolts, put new alternator on, tighten bolts until you can just move alternator, fit new belt, move alternator so the belt is tight and then tighten bolts to their specified torque.
Loosen alternator remove old belt. Reroute new belt, tighten alternator.
You have to remove the power steering belt and the AC belt to remove the alternator belt.
you have to loosen the top alternator bolt alowing the alternator to swing forward loosening the beltThis answer was retreived from the previous page
Go to your local library and look at the Chiltons automotive book for your year car. It can help you tremendously. I do know you need a tension bar and two people to do this. Be careful as the belt is under alot of pressure and can snap in your face.
Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.
Reasons: Cheap Belt Too tight
The alternator belt on a 1998 Honda Civic is replaced by loosening the mounting bracket, disconnecting the wiring harness, and slipping the belt off the pulley. The alternator is then unbolted, removed, and a new unit put in place.
Take of te passenger tire and the shrouding that is there. The tensioner is on the other side of the shroud release the tension from the belt remove the belt. the alternator has two or three bolts holding it in place remove the and the wire from the alternator plus the plugs.