To change the alternator belt an a 1985 Chevy Celebrity: 1. Loosen the adjuster bolt and the mounting bolt. 2. Move the alternator to release the belt tension and remove the belt. Reverse to reinstall a new belt.
Follow the route of the serpentine belt. It drives the alternator.
To change the alternator in a 1985 Chevy Celebrity; 1. Disconnect the battery ground. Use protective gloves. 2. Loosen the belt adjuster bolt and the main mounting bolt. Move the alternator to loosen the drive belt, then remove the drive belt from the alternator pulley. 3. Disconnect the wires from the alternator. 4. Remove the bolts and lift the alternator from its mount. Reverse the instructions to reinstall the alternator.
how do you change 2004 kia sorento alternator belt
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
A 2003 Impala does not have a timing belt. It has a chain.
You have to remove the power steering belt and the AC belt to remove the alternator belt.
Remove the belt from your 1985 Nissan 300 alternator. Remove the wiring harness from the alternator. Remove the alternator retaining bolts. The alternator will come off.
Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.
can you change the alternator belt in a 1998 Chevy metro from under the car.
No belt it is a chain - no changing needed
You should change the timing belt on a 2003 when it wears out or breaks. Changing the belt beforehand is not needed.
To change the alternator drive belt on a Bobcat 853 you start by lifting the cab. With the cab up, you can see the back of the engine and alternator. Locate the belts spring tensioner and release the belt.
loosen the alternator bolts to get that belt off and the other belt is loosened by loosening the power steering reservoir bolts.
You can change the alternator belt, on your 1994 General Motors vehicle, by loosening the tensioner pulley. The loosened the tensioner pulley will create slack in the belt. Remove the belt and replace with a new belt.
You can remove your 1993 Mitsubishi alternator belt by loosening the tensioner pulley. Slide the tensioner pulley to the right. The alternator belt will become loose and can be removed. Reverse the process to put the new alternator belt on.
when do you change cam belt and when do you change timing change
See instruction on http://www.mgfcar.de/alternator/belt_tension_MGF.htm
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
the alternator belt is the one all the way in the back. You have to loosen the power steering pump, A/C idler pulley, and then loosen the alternator.
What belt? Drive belt is easy, just loose the 3 bolts on the alternator, pry the alternator forward, put the new belt on, pry the alternator back, and tighten the bolts. Power steering belt is much more difficult.
where is the diagram on a alternator belt ..huh?
Remove Battery Negative Cable & secure away from post. Release tension on Belt Tensioner & remove Serpentine Belt from Alternator Pulley. Remove Battery Cable & Electrical Plug from Alternator. If applicable, remove Power Steering Line Clip from Alternator. Remove Alternator Mounting Bolts. Remove Alternator. Installation is reverse.....
theres 2 bolts on the alternator 1 of them is to loosen the belt of and the other is to remove the alternator all together i hope that's a helpful answer to your question