First start by removing the elecrtical plug, then remove the coil and spark plug wires. Now losen the valve cover bolts(don't worry the gasket reseals upon reassembly) now remove the two bolts that hold the distributor against the head, now gently slide the distributor out , do not under any circumstances pry on the distributor where it bolts to the motor, the distributor casing could break(speaking from experience) to reassemble follow steps in reverse order(make sure you do not turn the motor over with the distributor out because you could screw up the timing)
How do you replace a water pump on a 98 nissan altima?
where is the oxygen sensor in a 1998 Nissan altima 2.4gxe
i WANT TO KNOW WHERE THE DAUL AIR BAGS ON ALTIMA 98?
Intake
NO. 98 and 99 are the same(2 pieces). But 00 and 01 are different They come i 1 piece.
how to repace the distributor on an 98 chevy silverado
I installed a rebuild engine 2.4 on my 98 nissan frontier , but it wont start. How can I check if the oil pump and the distributor are markings a correct.
98 altima with 170000 and it still purs like a kitten
17 inch rims on a 98 Nissan AltimaYes you can put 17' rims on a 1998 Nissan Altima. The tire size which works best on both axels is 215/45, But based on the body size of the 98 Altima, you might want to go with 18 inch rims.
A 1998 Nissan Altima with a 2.4 ltr 4 cylinder engine hold 4 ans 1/2 qts of oil.
under ther glove compartiment
It is 87ft. lbs. My owners manual for the Nissan Altima 2001 says exactly, "72 to 87 ft-lb (98 to 118 Nzm)."