To Remove: The fuel filter mounts to the frame rail in front of the fuel tank. The inlet and outlet ends of the filter are marked for installation purposes. Relieve the fuel system pressure. Raise and safely support the vehicle then locate the filter. Disengauge the quick connect fittings from the filter. Remove the filter mounting bracket, then the filter. To install: The inlet and outlet sides of the filter are marked, install the filter with the inlet side to the fuel tank. Place the filter into the bracket. Place the bracket against the frame rail, tighten the mounting screw to 110 inch lbs. (12 Nm). Apply a light coat of clean 30 weight engine oil to the fuel filter nipples. Install the fuel lines. Lower the vehicle. Start the engine and check for leaks.
Wiki User
∙ 2006-03-27 03:50:52You need a special tool that slides into the end of the fitting of the fuel filter. Its commonly called a fuel filter remover. it should be a round peice of plastic or mettal that clips over the fuel line and slides into the end and releases the compression fitting
I just change my fuel filter in a 95 Avenger v6. I have to take the batterie out, and the windschild wascher fluid coonteiner, then lose it up the bottom and upper hose in the fuel filter and last take the fuel filter out with the bracket attach to it.
It is integrated with the fuel pressure regulator. The fuel tank must be removed to replace it.
Inside the Fuel Tank. You'll have to drain and drop the fuel tank to change it. Not a job for the untrained!
== ==
The fuel filter is part of the pump module in the fuel tank.
your fuel pump is almost always in your gas tank
show me how to replace the fuel filter on 1995 toyato corolla
Fuel filter is in the gas tank along with the fuel pump, I have to change mine out, making the truck run poorly. Waiting for a warmer day.
No.
Only one serviceable fuel filter but, there is also a filter at the pickup in the fuel tank and each injector has a filter.
In the tank